CONTENT I. Usage Notice.....................1 II.Safety Warning..................1 III. Precautions for Use.................5 IV. Product Diagram and Overview...............5 V. Preparation before Use................6 VI. Usage Instructions...................7 1. Display Panel Function Descriptions............7 2. First Initial Starting..................8 3.Function Setting..................8 VII. Defrosting, Unused and Maintenance...........10 1.Defrost......................10 2.Stop Using....................10 3.Maintenance....................10 VIII.
I. Usage Notice Thank you for choosing and using NANBEI’s biomedical products. For your safe and convenient use and reasonable maintenance of this product, please read this manual carefully before using, and keep it in an adequate place to refer it as necessary. The device operator can copy some sections of this operation manual, but only for internal use, for example, to guide the user on how to handle an emergency.
III. Precautions for Use ● Before placing the items in the ultra-low temperature freezer, please confirm whether the temperature inside the device has reached the set temperature, and then put the items in batches. Do not put more than 1/3 of the inner volume of the item each time, in case the temperature rises too much.
Before using the freezer for the first time, the moisture in the device should be cleaned, especially the water on the inner door and inner door cover to prevent the door from freezing when the temperature is low, which makes the door difficult to open! Any product may be damage.
▶ Ultra-low temperature freezer: fasten the door lock and move it lightly. ▶ Remove all packaging components (including protective foam inside the cabinet). ▶ Please check the attachments in the device according to packing list. ▶ The product should be cleaned before use. ▶...
● Current temperature: indicates the temperature inside the device ● Target temperature: indicates the setting position ● Hot end temperature: indicates the hot end temperature of the refrigeration unit ● Ambient temperature: indicates the temperature of the environment in which the device is located ●...
Page 11
000000. After inputting, you can change the password. Click the “ON” or “OFF” next to the password lock to enable or disable the password lock. iii. Alarm function: In the power-on state, the device will alarm when there is any of the following conditions, there will be a beeping alarm: 1 the ambient temperature is higher than 40 °...
VII. Defrosting, Unused and Maintenance 1. Defrost ▶ After working for a period of time in the ultra-low temperature freezer, the inner surface will be frosted, which will affect the cooling effect and increase the power consumption. When the frost layer is too thick, it should be defrosted;...
Page 13
wholeheartedly so as not to cause losses to you. Below are normal operations: ▶ There is some attack sounds when the freezer starts or stops. When the ultra-low temperature freeze is used or started for the first time, there is a normal phenomenon that the working time is long and the noise is large.
Warning: This product is strictly forbidden to be repaired except Zhongke Meiling Service Center. IX. Specification X. Mainly Use Performance and Indicators 1. Main Technical Parameters MPF 1,8L 80 Model Temp. range -40°C to -80°C Volume 1.8 L Style vertical, with handle External dimensions (width * depth * height) 245*282*496mm Internal dimensions (width * depth * height)
(20~80%) RH Ambient humidity Current(A) 0.46A Power 2. Packing List Name Operation manuel Quantity 3. Electrical Schematic Diagram * Due to the rapid improvement of the product, please refer to the technical data and electrical schematics on the product nameplate. - 13 -...
Need help?
Do you have a question about the MPF1.8L 80 and is the answer not in the manual?
Questions and answers