For more information regarding the- se solutions, see the relevant manuals, available at clicmonitor.com. The CcM WiFi is one of the devices in the CcM family range, which connects to principal devices such as 1.1 CONTENTS OF THE BOX CcM2, CcM3 and CcM4 from the CcM family to pro- vide them with wireless connectivity.
The CcM WiFi devices should only be used for this purpose. Monsol Electronic is not liable for any da- mages caused by an inappropriate installation, use or maintenance of the system.
CcM family device must first read and 4. DEVICE DESCRIPTION understand this user manual, especially the safety recommendations. 3.10 GENERAL SAFETY REQUIRE- In Figure 1 the CcM WiFi is shown. MENTS Operator The person in charge of handling the electrical device is responsible for the safety of persons and property.
CcM WiFi has been connected to other CcM devices by cable connection using a prin- cipal bus RS-485. • SECONDARY UPPER BUS CONNECTOR (red): Extension of the connector of the secondary bus of the CcM (see manual of the CcM devi- ce in question available at clicmonitor.com).
CcM by activating the thermal-magnetic switch or resi- dual-current circuit breaker. Then, the LED of the CcM WiFi will flash once to indicate that the device is powered and is on. Automatically, the CcM WiFi will proceed to syn- chronize with the principal hosting CcM and will flash twice.
Below, you will find a description of the process to configure the CcM WiFi using the web portal, which is embedded in the device. There are two options to access the configuration of the WiFi device.
(see section 6.1.1). The following field that appears is “Device Hostna- me” where you can assign a name to the CcM WiFi device for later identification in your WiFi network, for example “engine_room”. By default, the field is set as “ChangeName”.
Page 12
IP assigned, or because the routing device is unable to provide an IP when a dynamic IP is assig- ned, the CcM WiFi device will remain in the Point of Access mode. Conversely, if the configuration is successful, the CcM WiFi will change to Client mode (described in section 6.2).
Page 13
CcM WiFi device will remain in the Point of Access CcM devices connected to that bus using a WiFi in- mode. Conversely, if the configuration is successful, terface generated by the CcM WiFi and using the the CCM WiFi will change to Client mode (described Modbus RTU over TCP protocol.
CcM must have assigned to it the default Modbus address, i.e. “1”. 6.2 CLIENT MODE Once the CcM WiFi device is configured, it will be connected to the local WiFi network selected du- ring the “Access Point” configuration (section 6.1) and it will have an internet connection.
Figure 15 CcM Web Server – Settings • Restore: The page to restore the default values of the CcM WiFi device, and thus, to return to the Access Point mode (section 6.1). On this page you can change (if required) the ne- twork configuration of CcM WiFi, in the same way 6.2.1 Settings...
EnergyCcM tool (clicmonitor.com), configuring CcM WiFi in Cloud mode. To do this, it is necessary to create a user on the clicMONITOR platform, and to associate the principal device through its serial number.
(section 6.1). It is possible to update the firmware of the CcM Another way to restore the CcM WiFi device is by WiFi locally. To do this, the user must access the IP using the available push button. If at any time the...
The firmware update may also be carried out through the app (section 7). 7. clicMONITOR APP If you decide to configure the CcM WiFi using the Android application, you should download it from the Google Play Store by searching “clicMONITOR”...
7.2 CCMS TO BE CONFIGURED At the “CcM to be configured” section at list of the nearby CcM WiFi or CcM2-W devices in Access Point mode will appear. They generate their own WiFi network “CCM_XX:XX”, as per the example in Figure 25.
Page 20
Cloud, FTP or Gateway (section 6.1.1) Set device time zone Associate user and group Detail auxiliary information (notes, lo- cation and photo) 8. Set configuration password (optional) Figure 26 App clicMONITOR – CcMs to be configured – Configuration process CcM WiFi Manual 2021...
CcM). • Consumption study (Cloud mode), based on the data uploaded to the EnergyCcM server. • Configuration of the device. • Configuration of alarms. Figure 27 clicMONITOR App – search for already configu- red CcM devices CcM WiFi Manual 2021...
Using this platform, the user may link to his or her EnergyCcM account the principal CcM devices, which have WiFi connectivity either because it is already integrated in the device (CcM2-W) or because it was paired with a CcM WiFi peripheral. Thus, the EnergyCcM platform enables to unify various types of CcM device installations (wireless...
Need help?
Do you have a question about the CCM WIFI and is the answer not in the manual?
Questions and answers