Download
Share
Print this page
Cellferno M2000 Quick Start Manual
  1. Manuals
  2. Brands
  3. Cellferno Manuals
  4. Network Router
  5. M2000
  6. Quick start manual

Cellferno M2000 Quick Start Manual

4g/5g outdoor cpe
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
M2000
4G/5G Outdoor CPE
QUICK START GUIDE

Advertisement

loading

Summary of Contents for Cellferno M2000

  • Page 1 M2000 4G/5G Outdoor CPE QUICK START GUIDE...

  • Page 2: Preparing To Install

    Introduction Thank you for purchasing the Cellferno M2000 5G CPE. This high-quality IP67 rated product is designed to provide high speed internet using the 4G/5G mobile network. Preparing to Install Required Tools and Materials • Ladder • Installation PoE* cable (RJ45 fittings attached) •...

  • Page 3: Pre-Installation

    Pre-Installation Unscrew the protective shield over the SIM slots using a Phillips-head screwdriver. se the included SIM tool to insert a Nano 4FF SIM card into the appropriate SIM slot. Reattach the protective shield cover to a torque of 1.2 Nm (0.885 ft/lb). Unscrew the PoE gland cap and insert one end of the installation PoE cable.
  • Page 4 3. Thread the permanent PoE cable through the hole in the assembled PoE gland cap and attach a RJ45 connector to the cable. 4. Insert the connector into the M2000 and screw on the gland cap. The cap will keep the PoE connection secure and watertight.
  • Page 5 2. Insert the large bolts into the backing plate on the mount then screw the supplied nuts and locking washers to secure to the mount backplate 3. The mount backplate can now be attached to the back of the M2000 unit using the M6 external locking washers and the M6 21mm bracket mount bolts.
  • Page 6 3. Take a ratcheting socket wrench and device/ smartphone with the Inseego Mobile App to the M2000 location. 4. Rotate the M2000 whilst using the Inseego Mobile App to find the best signal. Speed tests can also be conducted to find the optimal direction.

  • Page 7: Testing The Connection

    • Inseego Mobile App - Use the same mobile app you used to install your M2000 to perform basic device monitoring and management. • M2000 Admin Web UI - Access the Web UI at http://192.168.1.1 for a full set of device management features. The initial sign in password is: Fast5G! •...
  • Page 8 For more detailed information, please contact your reseller or download the Cellferno CPE M2000 User Guide from www.powertec.com.au Cellferno is distributed and a Trademark of: 16/511 Olsen Avenue Southport Qld 4215 Australia Ph: +61 7 5577 0500 Email: sales@powertec.com.au...