Page 2
Title to the product and risk of loss transfers to the customer upon shipment from our dock, F.O.B. Gadsden, Al. BUSHMASTER is not responsible for prod- uct damage or lost in transit. Claims for product damage or lost in transit are the responsibility of the buyer and should be filed with the carrier immedediately.
Page 3
No one is authorized to alter, modify, or enlarge this warranty nor the exclu- sions, limitations and reservations. Every BUSHMASTER product is the highest quality available. If you wish to contact us regarding this product, please call toll free between 8:30 a.m. and 4:30 p.m.
Page 4
Phone*800-538-1780 Page 4 Fax*256-549-5502 Table of Contents Warranty Safety Instructions Operating instructions (cutters) Maintenance for Cutters Parts breakdown-BM Models 10-11 Parts breakdowns-SL Models 12-13 Parts breakdowns-MX Models 14-15 Parts breakdowns-TS Models 16-17 Parts breakdowns-RG602 Grapple 18-19 Parts breakdowns-HH100 Auger 20-21 Replacement parts-LM &...
Page 5
3. DANGER LABEL A. Disengage power to the BUSHMASTER and stop the engine before leaving the Operators cab. B. NEVER place hands or feet under the cutter or near any moving parts when the unit is running.
Page 6
6. LIFT LIMIT WARNING LABEL Insure that the LIFT LIMIT chain is fastened before operating the rotary cutter. 7. Do not carry passengers on any Bushmaster skid steer attachment! Never leave any Bushmaster skid steer attachment unattended in a raised position.
Page 7
24 inches off the ground for proper and safe cutting operation. CUTTING OPERATION The BUSHMASTER rotary cutter is capable of mulching trees and vegetation of varying height and depending on model, up to 8” trees. Designed to make your loader more versatile, the BUSHMASTER rotary cutter is intended to perform these functions without the deck being raised more than a vertical height greater than 3 feet.
Page 8
Phone*800-538-1780 Page 8 Fax*256-549-5502 OPERATING INSTRUCTIONS FOR SKID STEER LOADERS NEVER raise the back of the cutter more than 2 feet off the ground. NEVER expose yourself or anyone else to the rotating blades. If you can see the rotating blades of the cutter when operating the unit, the back of the cutter is raised too high.
Page 9
ACE Manufacturing & distributing, Inc. Page 9 MAINTENACE FOR SKID STEER AND EXCAVATOR CUTTERS A. General Always block up mower and remove key before servicing. B. Daily maintenance Check Gearboxes and overhead load bearings for proper lube levels. Thoroughly check cutter for loose bolts and nuts and check for damage before operation.
Page 21
ACE Manufacturing & distributing, Inc. Page 21 HH Model Parts Description SSHUP kid Steer hook up w/ears ivoting Box Rail SSE203A ydraulic motor SS0603A lanetary gear box 2 9/16” shaft GBMP ear Box Mounting Plate 6400-8-10 1/2” male JIC x 5/8” male STO (2) Gr.
Page 22
Phone*800-538-1780 Page 22 Fax*256-549-5502 REPLACEMENT PARTS FOR LM101 & SM101 B2B48SD 1 1/2” x 4” x 48” Replacement Fork Replacement Bale Spear SP-SL Weld on sleeve for Spear...
Page 23
ACE Manufacturing & distributing, Inc. Page 23 Installation Instructions for Skid Steer Cab The cab door should consist of two pieces, a door and a hinge. The lexan glass on the door may have protective sheeting on both sides. Peal off the coating in order to see through the operation window. Step 1- Take the door and hinge and fit them together.
Page 24
Model #__________________ Serial # __________________ Date mfg._________________ Date of purchase___________ Motor # _________________ Do not exceed____ GPM. ACE Manufacturing & distributing, Inc. P.O. Box 1188 137 Ewing Ave. Gadsden, Al. 35901 Phone: 800-538-1780 Fax: 256-549-5502 E-mail: sales@bushmasterequipment.com...