Download Print this page

List Of Components - EcoSystem Aquarium MIRACLE MUD PRO Series Owner's Manual

Hide thumbs Also See for MIRACLE MUD PRO Series:

Advertisement

DAILY: 
1.  Replace evaporated water by adding fresh filtered water into 
the main tank. (Reverse Osmosis [RO] water may be used) 
Recommended height : ~2" above 2 
2.  Additives 
­add appropriate EcoSystem Solutions into your tank (Reef 
TM 
Solution 
or Fish Solution 
TM 
­add Garlic Elixir 
­add calcium and buffer if needed – test water first 
3.  Feed fish. 
DO NOT feed filter­feeding corals (especially in new aquarium 
setup) as EcoSystem Miracle Mud® Filter produces enough 
phytoplankton & zooplankton. 
AS NECESSARY: 
1.  Vacuum siphon aquarium floor + water change 
Keeping the aquarium floor as clean as possible is pertinent to 
ensure  the  health  of  the  tank  –  this  task  is  easier  with  less 
substrate  in  the  main  tank.  The  frequency  of  this  cleaning 
process depends on your tank, livestock and substrate level. 
a.  Carefully  unplug  your  aquarium  pump  form  the  power 
source before you begin any cleaning / water changes. 
(Refer to safety instructions – Pg. 1­2) 
b.  Vacuum  siphon  any  detritus  from  your  live  rock  and 
from  the  bottom  of  your  aquarium  tank.  Make  sure  to 
clean  the  substrate  bed  thoroughly.  Try  NOT  to  move 
live  rocks  around  and  DO  NOT  disturb  any  of  the 
substrate bed directly underneath live rocks. 
c.  Add  pre­mixed*  salt  water  to  your  marine  aquarium 
tank.  The  amount  should  be  appropriate  to  your 
aquarium tank volume. 
* It is recommended that you mix your salt water and 
allow it to stand for 24 hours before using it. 
MAINTENANCE – Pg. 17 
nd 
rd 
and 3 
chamber divider. 
TM 
Table 2 – Components of ProSeries 
MODELS 
Acrylic sump with attached Pre­Filter kit, 10 lbs (4.536 kg) 
of Miracle Mud, (1) 13W P.C. Light, (1) 1" (2.54 cm ) 
PRO 
Bulkhead, bioballs, (1) 4" (10.16cm) 200­micron bag, & (1) 
2410 
modified CPR Protein Skimmer + skimmer pump 
Acrylic sump with attached Pre­Filter kit, 13.5 lbs (6.1236 
kg) of Miracle Mud, (2) 13W P.C. Light, (1) 1" (2.54cm) & 
PRO 
(1) 1.5" (3.81cm) Bulkhead, Bioballs, (1) 4" (10.16cm) 
3012 
200­micron bag & G­1 Protein Skimmer + skimmer pump 
Acrylic sump with attached Pre­Filter kit, 20lbs (9.072 kg) 
of Miracle Mud, (2) 18W P.C. Lights, (1) 1" (2.54 cm) & (1) 
PRO* 
1.5" (3.81cm) Bulkhead, Bioballs, (1) 4" (10.16cm) 
3612 
200­micron bag & G­1X Protein Skimmer + skimmer pump 
Acrylic sump with attached Pre­Filter kit, 30lbs (13.608 kg) 
of Miracle Mud, (2) 18W P.C. Light, (1) 1" (2.54 cm )& (1) 
PRO* 
1.5" (3.81cm) Bulkhead, Bioballs, (1) 4" (10.16cm) 
3616 
200­micron bag & G­3 Protein Skimmer + skimmer pump 
Acrylic sump with attached Pre­Filter kit, 50lbs (22.680 kg) 
of Miracle Mud, (3) 18W P.C. Light, (2) 1" (2.54 cm) & (2) 
PRO 
1.5" (3.81cm) Bulkheads, Bioballs, (2) 7" (17.78cm) 
4822 
200­micron bag & G­4X Protein Skimmer 
Acrylic sump with attached Pre­Filter kit, 110lbs (49.896 
kg) of Miracle Mud, (4) 18W P.C. Light, (2) 1" (2.54 cm) & 
PRO 
(2) 1.5" (3.81cm) Bulkheads, Bioballs, (2) 7"(17.78cm) 
7222 
200­micron bag & G­4X Protein Skimmer + skimmer pump
P.C. Light = Power Compact Light 
*Models PRO3612 and 3616 are available also in GLASS. However 
glass models do NOT come with pre­filter kit nor 4" (10.16cm) 200 
micron bags. 
NO pump (beside pump for protein skimmer) or plumbing materials 
are included in any EcoSystem Miracle Mud® Filter – ProSeries 
Sump Models. Please consult your dealer for the required materials. 
LIST OF COMPONENTS – Pg. 6 
COMPONENTS 

Advertisement

loading