Table of Contents
Advertisement
PRO 40
1.
Insert plastic screws into the two cube anchors at the bottom of
the PRO 40 Filter box so that the heads of the screws are
aligned with the black-back side of the PRO 40.
2.
Place PRO 40 Filter box's hang bar on upper rim of the
aquarium so that filter sits outside the aquarium with black-back
side up against aquarium. Plumbing attachments (intake and
return pipes) will be inside the aquarium.
3.
Mount PRO 40 filter box to aquarium by placing 2 L-brackets at
the two different sites on the hang bar – each with 2 predrilled
holes (4 predrilled holes total on hang bar). Which end of the
L-bracket and which of the two holes of each site of the hang
bar that you will use will be determined by the width of your
aquarium's rim. Try to fit as close as possible and align
L-bracket with one of the pre-drilled holes. Secure with plastic
screws. (One end of L-bracket will be inside aquarium while
other end will be on top of filter hang bar).
PRO 60
1.
Insert plastic screws into the three cube anchors at the bottom
of the PRO 60 Filter box so that the heads of the screws are
aligned with the black-back side of the PRO 60.
2.
Place PRO 60 Filter box's hang bar on upper rim of the
aquarium so that filter sits outside the aquarium with black-back
side up against aquarium. Plumbing attachments (intake and
return pipes) will be inside the aquarium.
3.
Mount PRO 60 filter box to aquarium by placing 2 L-brackets at
the two different sites on the hang bar – each with 2 predrilled
holes (4 predrilled holes total on hang bar). Which end of the
L-bracket and which of the two holes of each site of the hang
bar that you will use will be determined by the width of your
aquarium's rim. Try to fit as close as possible and align
L-bracket with one of the pre-drilled holes. Secure with plastic
screws. (One end of L-bracket will be inside aquarium while
other end will be on top of filter hang bar).
SET UP PROCEDURES
Mounting to Aquarium – Pg. 7
REEF TANK (continue)
4. After 4 weeks of cycling your ProSeries Hang-On-
Back EcoSystem Miracle Mud® Filter, check your
aquarium tank water quality. If it is within the specified
range (refer to Table 4 on pg. 14), you can gradually
introduce corals that are recommended by your
dealer.** Please do not add more than two corals each
time, allow the current corals to acclimate in your
aquarium tank before adding more corals.
5. After 6 weeks, check the water quality (refer to
Table 4 on pg. 14) of your aquarium tank before
adding any fish.
6. Gradually introduce quarantined* fish, placing one
fish at time into your aquarium tank. Test your
aquarium tank for ammonia daily, the level should be
zero before you add more compatible fish into your
aquarium tank.**
* Fish should be quarantined in a separate tank for at
least 2 weeks. This is a preventive measure.
**Your local dealer will be able to recommend the
appropriate amount and type of fish/ corals/ plants
for your aquarium.
Recommended Additional Reference / Guide Book:
Michael S. Paletta – The New Marine Aquarium
(Microcosm Publications)
SET UP PROCEDURES
Livestock – Pg. 16
Advertisement
Table of Contents
