Advertisement
Quick Links
Advertisement
Summary of Contents for G3LIV ISOTERM-MULTIMODE
- Page 1 ISOTERM-MULTIMODE INSTRUCTIONS for DATA-CW-FSK-INTERFACE de G3LIV July 2012 Series 5...
- Page 2 Welcome to the World of DATA. ISOTERM-MULTIMODE The ISOTERM MULTIMODE as its name implies is designed to be used with AFSK DATA/CW/FSK andbeing fully isolated it reduces the chance of RF and Earth type feedback problems. Which can result in unacceptable signals being radiated.
-
Page 3: Computer Connections
On the soundcards control panel, The VOLUME and WAVE sliders controls the amount of audio being fed to the Rig Via the Multimodes RED attenuator And the Line IN or MIKE sliders the amount of Receiver Audio driving the Soundboard input. A little play with these controls will make there function obvious. - Page 4 CW OPERATION When you are satisfied that the main DATA AFSK side is working. You can now start on the CW TX/RX mode. I have supplied CWTYPE v1.6 and CWGET v1.5 on a CD. It is always worth checking for later updates as this is being done at regular intevals. I find CW receive progams work quite well on GOOD CW like those sent on a computer keyboard.
- Page 5 FSK RTTY OPERATION There are 2 main ways the FSK input of the Transceiver can be driven. This all depends on whether the rig has a separate RTTY FSK INPUT or it is part of the Main Data Port. In the case of it being in the Main DATA Port I will supply the DATA cable with the FSK drive going to the designated pin.
- Page 6 ADDITIONAL NOTES FOR the MULTIMODE INTERFACE Although KENWOOD and ICOM 706 rigs use the same 13 Pin Din Plug. The wiring IS NOT the same. If a KENWOOD wired plug is inserted into a ICOM 706 this will cause THE INTERNAL FUSE TO RUPTURE. Further notes.
- Page 7 TROUBLE SHOOTING NOTES FOR INTERFACEING OF ISOTERM It would appear from phone conversations I am having with various customers, that a number of people are not reading the instructions supplied either with the ISOTERM or the HELP file in DIGIPAN or other programs. I will attempt here to cover the common problems discussed.
- Page 8 If you find you are really stuck don’t loose more hair, ring me on 0191 2843028. But please to have read the instructions fully before you do. Thanks again for buying this interface De Johnny G3LIV Page 7 ISOTERM MULTIMODE July 2012 Series 5...