MojiLife M3 Instructions

GETTING STARTED

Step 1: Remove M3 from
packaging.
NOTE: MojiMinis sold separately.
Step 5: Separate cap from the bottom of
the MojiMinis and insert desired fragrance
into MojiMini and replace cap.

OPERATING YOUR M3

Step 1: To turn the device
on hold power button for 3
seconds. The M3 is now in
continuous running mode.
Step 2: To schedule device
to operate for 60 minutes on
and 60 minutes off press
power button a second time.
Step 3: To connect device to
your smartphone and in
order to utilize the App and
set schedule for your device,
press button a third time
(see App Instructions in this
booklet). This will activate
bluetooth mode. Note: You
will notice when bluetooth
mode is activated the fan
will stop spinning.
1
M3 Instructions
Step 2: Insert power cord into
the bottom of the device.
(Unlike the AirMoji, the M3 has no
battery. To operate this device it
must be plugged into a power
source at all times.)
Step 3: Plug the power cord
into an electrical outlet
Step 6: Place the three MojiMinis in the docking port on top of the
device by inserting the MojiMini at a slight angle and aligning the side
notches with the corresponding slots
M3), once inserted into slot, push down so that MojiMini is ush.
Step 4: To activate or deactivate
an individual docking port, press
the A, B, or C button that
corresponds to the desired
docking port. This relates to any
mode you may have the M3 set
in. For example if you are in
mode 2 (60 mins off 60 mins on)
and have port B deactivated then
only A and C will be operating. If
you want port B activated you
can just simply press the B
button.
Step 5: To turn the device off,
hold the power button for three
seconds.
©2021 MojiLife, LLC. All rights reserved. • Pleasant Grove, UT 84062 • v1 07302021
Step 4: Choose three
fragrance pods and
remove bottom and
top foil seals.
(located toward the center of the
1-2-3