Summary of Contents for EcoFlush B8104
- Page 5 Step 4. Check the flush control valve for any leaks and make sure the connections are also tight. If water is leaking from the flush control valve then the flush control valve should be replaced (EcoFlush Part Number B8106-06, covered by factory warranty).
Need help?
Do you have a question about the B8104 and is the answer not in the manual?
Questions and answers
flush control handle will not move is stuck cant move it
@Craig Leonard Larson control stuck open
The flush control handle on the EcoFlush B8104 may be stuck and not moving due to a leak or issue with the flush control valve or the Flush Valve Cartridge (FVC). If the flush control valve is leaking, it may need replacement. Also, air leaks around the FVC, possibly caused by a damaged or mispositioned o-ring, can affect operation. These issues can create pressure problems that cause the handle to stick.
This answer is automatically generated