Download Print this page

Geek AX-D301 Instruction Manual

Hide thumbs

Table of Contents

Need help?

Do you have a question about the AX-D301 and is the answer not in the manual?

Questions and answers

Summary of Contents for Geek AX-D301

Page 2 IMPORTANT SAFEGUARDS When using your digital multi-function cooker, basic safety precautions should always be followed: 1. Insert the digital multi-function cooker directly into the wall socket as far as possible, and do not share the same socket with other electrical appliances. Turn off and unplug the plug 10 hours after starting the machine, check whether the plug and socket are hot or not.
Page 3 ASSEMBLY INSTRUCTION PARTS DESCRIPTION...
Page 4 CONTROL PANEL POWER ON After the product is plugged into the power supply, a "BI" sound will be emitted, and the panel indicator light will flash for a second and then go out. STAND BY Switch the knob to select the function, and the corresponding function light will flash. Press the knob to start working, and the corresponding function light is always on.
Page 5 2.To open the lid, you can hold on the handle, and rotate clockwise until opening, then lift it up. 3. Take out inner pot, and put the food and water into the pot. Food and water shouldn’t be over the full scale, but shouldn’t be less than 1 / 3 of full scale.
Page 6 5. Close the lid 5.1 Make sure putting sealing plate into the lid. 5.2 Rotate the sealing plate left and right by hand to make it freely and evenly placed in the lid. 5.3 Hold on the handle, lay it flat to the limit edge, and then rotate the lid anticlockwise to buckle position. You’ll hear "click"...
Page 7 8. When the food is cooked, unplug the power plug. After the cooker cools down, check the float value falls completely. Then hold on the handle and open the lid. 9. Before opening the lid, press the pressure release button by hand. When pressing the exhaust button, keep the angle of your hand to exhaust port between 90°...
Page 8 TROUBLESHOOTING PROBLEM PROBLEM CAUSE SOLUTION Function indicator Light flashes Re-plug in NTC. If it is still NTC cuts off and buzzer beeps unworkable, try to replace NTC. Saute level indicator light flashes Plug off the cooker and re-turn on Overheat and buzzer beeps after it cooled down Munual level indicator light flashes...