Summary of Contents for SIFSOF SIFROBOT-6.51
- Page 1 SIFROBOT-6.51 User Manual SIFSOF LLC. Before use it, please be sure to read the manual of this product carefully. Website: https://www.sifsof.com/...
-
Page 2: Safety Instructions
NOTICE: 1. This product must be charged by using charging pile or authorized cable. 2. Opening the shell by unauthorized person is strictly prohibited. 3. Any upgrade process will be shown in latest users’ manual. 4. 4. Anything wrong or unclear, please contact us (/distributors/resellers) in time. - Page 3 11. It is forbidden to operate the robot to pass 1cm thresholds steps or 5° slope. 12. The robot/charging pile/power adapter is not allowed to being contacted with/putting into water. 13. Aisle width should be larger than 0.7m. 14. Normal service temperature is between 0℃ to 40℃. 15.
-
Page 4: Hardware Introduction
1. Description This file is to let you well-know our Robot and easy to control robot clearly and easily. 2. Hardware Introduction 2.1 About robot General Specifications Project Parameter Color White (Extra cost for customization) Ultrasonic Atomization 6 Sets Atomization Efficiency 2.5 L/h Liquid Capacity 15 L... - Page 5 UV Light Power Consumption 20 W UV Light Wave Length 253.7 nm RK3288 ,Quad-core Dimensions 54cm*54cm*110cm Lifting height up to 150cm Screen Size 12 inch Touch screen Project Capacitive Screen Resolution 1024*768 Memory 2GB RAM (Customized to 4GB) Flash 8G (Customized to 128G) Battery Type Lithium Battery Battery Capacity...
- Page 6 2.2 About Charge Pile Indicator Light Preset Conditions Status Description 1. Connecting 1. Red light keeps on 1. Connecting Power Indicator 2. Disconnecting 2. Light off 2. Disconnecting 1. No charging 1. Red light keeps on 1. No Charging 2. Charging 2.
- Page 7 2. After fixing the charge pile, please do NOT move, OR it will affect the mapping and navigation. 3. Two robots can NOT share one charge pile. 4. If the indicator light flashes frequently, it means that the safety mechanism of the charge pile has been triggered, and the power of the charge pile needs to power- on again.
- Page 8 3. iPad Interface Description 3.1 Main Page (Map Page) To create a new map, continue mapping, view map. To Show related information of Robot.
- Page 9 3.2 Work Page To control robot’s work in real time.
- Page 10 4.Robot Interface Description 4.1 Main Page This page shows 4 blocks: Custom Work, Task List, Work Record and Temperature Measurement (If the robot has camera module, this function will be activated).
- Page 11 4.2 To create work content 4.3 Check task(s), touch operate to work...
- Page 12 4.4 Work Record Page...
- Page 15 5 UV Module Part Number: IBEN-M01-GPH436T5L Specification: 20W Ballast: IBEN-M01-PW11-425-40D24(DC24V)
- Page 16 A General Data (Electric Ballast) 1 Rated Voltage (50Hz): DC24V 2 Calibration Current (50Hz): 425mA 3 Lamp Voltage (Base up, 50Hz): 4 Lamp Wattage (Base up, 50Hz): 5 Lamp Current (Base up, 50Hz): 425mA B UV Output (25℃, 100hs, 253.7nm, Base up): 72μW/cm² UV Maintenance (100hs-2000hs) 2000 UV retention UV Maintenance (100hs-5600hs)
- Page 17 F Dimensions 1 Overall length 436±2mm 2 Diameter 15±0.5mm G Base G100Q Base Material Ceramic H Glass High Purity Quartz I Storage Environment Dry and Ventilation Environment Temperature of storage places Max: 80℃ Min: -40℃ J Reference Standard: IEC 60901-2000 IEC 61195-1999 K Shell Material Thickened Aluminum Alloy Housing...
- Page 18 Lamp Diameter=15±0.5mm Lamp Holder Length=33±1mm Lamp Holder Length=19±0.5mm M Ballast Drawing (mm) Overall Length: 165mm Width: 38mm Thickness: 26mm N Accessories Drawing Stainless Steel Clip Ceramic Lamp Holders...
Need help?
Do you have a question about the SIFROBOT-6.51 and is the answer not in the manual?
Questions and answers