mh acoustics Eigenmike em32 Assembly

mh acoustics Eigenmike em32 Assembly

Advertisement

mh acoustics LLC
25A Summit Ave
Summit, NJ 07901
Phone: 908 277 3131
Fax:
908 934 9233
09/06/2012
®
Assembly of mh acoustics em32 Eigenmike
microphone array windscreen
© 2012 mh acoustics LLC. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Eigenmike em32 and is the answer not in the manual?

Questions and answers

Summary of Contents for mh acoustics Eigenmike em32

  • Page 1 LLC 25A Summit Ave Summit, NJ 07901 Phone: 908 277 3131 Fax: 908 934 9233 09/06/2012 ® Assembly of mh acoustics em32 Eigenmike microphone array windscreen © 2012 mh acoustics LLC. All rights reserved.
  • Page 2 Each brass hoop is the same size so there is no need to worry where each hoop goes into the base. • Figure 1: Photograph of the four main mechanical components of the windscreen. The ring “base” and the three brass hoops. © 2012 mh acoustics LLC. All rights reserved.
  • Page 4 Note that the screw threads on these two clamps have rubber © 2012 mh acoustics LLC. All rights reserved.
  • Page 5 This hole allows convection airflow to cool the em32 while in operation. Please make sure to orient the em32 array so that air convection can properly cool the em32 spherical array. Figure 8 shows the proper positioning of the vent hole at the top of the windscreen fabric sock. © 2012 mh acoustics LLC. All rights reserved.

Table of Contents