Table of Contents
Advertisement
2.5.
Text Input Method
This phone provides various text input methods that allow you to use less key strokes to input
and search for text:
English input
3. Call Function
After the setup described in the previous sections is completed, you are ready to make and
receive calls using the basic information provided in this section.
Note:
When you are using headset, please plug/unplug the headset gently to avoid damaging
the headset jack.
3.1.
Phone power on/off
Power on
Press and hold power to turn on the phone. If PIN code is required, please refer to the
previous section in this guide.
Power off
In Standby mode, hold power key to turn off the phone.
3.2.
Dial
When the network carrier is shown on the screen, your phone has entered the Standby mode
and you may make or receive calls. If you have installed two SIM cards, the two network
carriers will both appear on the screen.
3.2.1.
Direct dial
Press any number key to enter the Dial screen.
Domestic call
Press number key to entering the phone number(add area code when calling long distance),
and then press the dial key Send to make the phone call.
Note:
In single card mode, both Send will dial out to the one card.
In dual card mode, Send will dial out with card 1.
The screen will show the name and phone number of the person that you are calling. After the
call goes through, the screen will show a time meter in addition to the phone number and/or
the name of the person you are calling.
International call
Key in the symbol "+" by press twice *Key quickly, followed by the desired country code and
the phone number. For example, to make a call to France, tap twice *Key until "+" appears
13
Advertisement
Table of Contents
