Advertisement
4.6. Reversing the Doors
The original door open side is left. And the door open can be reversed from left side to
right side. Please proceed as follows:
Warning: Before revering the door, unplug the appliance from the main power.
1. Remove the screws (1) hold the top cover (2) and then take off the top cover.
2. Remove the screws (3) hold the top hinge (4) and then take off the top hinge (4).
3. Lift the upper door off the middle hinge pin and place it on a soft blanket to avoid
scratching the door.
4. Remove the two screws (5) hold the middle hinge (6) and then remove the hinge.
5. Lift the lower door off the bottom hinge pin and place it on a soft blanket.
6. Lay the appliance on a soft blanket and remove the screws (7) hold the bottom hinge
(8) and then remove the hinge.
7. Move the front leg (9) from left side to right side.
8. Unscrew the hinge pin (10) and then reverse bottom hinge (8). Install bottom hinge
(8) on the left side with screws (7).
9. Install the hinge pin (10) into the bottom hinge (8).
10. Stand the appliance and put the door on the bottom hinge (8).
11. Install the middle hinge (6) on the left hand side with two screws (5). Do not tighten
the screws (5) now.
12. Unscrew the hinge pin (11) and reverse the upper hinge (4). Then Screw the hinge
pin (11) into the upper hinge (4) from lower side.
13. Put the upper door on the middle hinge.
14. Assemble the upper hinge (4) on the left side with screws (3). Do not tighten the
screws (3).
15. Open the doors and check whether the doors can be opened smoothly and that they
make a good seal with the compartment when closed. If not, adjust the door. Then
tighten the screws (3) and (5) after the doors have been adjusted correctly.
16. Install the top cover (2) with screws (1)
.
10
Advertisement
