Advertisement
Quick Links
ROCKWELL SHOPSERIES
600W Blower
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Blower
These instructions contain important information that will help you get the best from your
Blower, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 1300 889 028
After Sales Support
FREE CALL 1300 889 028
EMAIL:salesau@positecgroup.com
RS8043
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Rockwell ShopSeries RS8043
- Page 1 ROCKWELL SHOPSERIES 600W Blower RS8043 Instruction Manual After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before operating or maintaining your Blower These instructions contain important information that will help you get the best from your Blower, ensuring it remains safe to operate.
-
Page 2: Table Of Contents
Contents Safety Information ����������������������������������������������������������������������������������������������������3 In The Box �����������������������������������������������������������������������������������������������������������������6 Assembly ������������������������������������������������������������������������������������������������������������������7 Operation ������������������������������������������������������������������������������������������������������������������7 Maintenance �������������������������������������������������������������������������������������������������������������9 Troubleshooting������������������������������������������������������������������������������������������������������� 9 Technical Data �������������������������������������������������������������������������������������������������������� 10 Customer Helpline 1300 889 028... -
Page 3: Safety Information
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols WARNING: Read the operator’s manual. Keep bystanders away. Warning of hazard SWITCH OFF: Remove plug from mains before cleaning or maintenance. Do not use in the rain or leave outdoors while it is raining. Wear eye protection Double insulation RCM approval mark... - Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions� Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference�...
- Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings g) Only use a weather proof extension cable fitted with a coupler according to IEC 60320-2-3. h) It is recommended that the appliance should be supplied via a residual current device (RCD) with a tripping current of not more than 30 mA.
-
Page 6: In The Box
In The Box Parts Blower Port On/off switch Lock-on Button Blower tube Handle Customer Helpline 1300 889 028... -
Page 7: Assembly
Assembly Assembling the blower tube (See Fig A1,A2) 1. Align the tab (a) on the Blower Tube(5) with the indentation(b) on the Blower Port (4) and attach the Blower Tube on Blower Port. 2. Then slightly rotate the tube until it locks into position as shown in Fig.A2. Make sure the blower tube is firmly assembled. - Page 8 Operation 2� BLOWING (SEE FIG C) When use for blowing, attach the Blower Tube 5) to the Blower Port(4). WARNING! Flying debris can cause serious personal injury to the operator, bystanders or pets. Keep bystanders and pets at least 5m away from the area of work and always wear suitable eye and ear protection, long pants and sturdy shoes or boots whilst operating the tool.
-
Page 9: Maintenance
Operation Maintenance 1. Store the tool, instruction manual and accessories in a secure, dry place. In this way you will always have the information ready to hard. 2. Keep the tool’s air vents unclogged and clean at all times. 3. Remove dust and dirt regularly. Cleaning is best done with a rag or brush. 4. -
Page 10: Technical Data
Technical Data Technical Data Table Rated input voltage 220-240V~50Hz Input power 600W No load speed 16000/min Air speed 3.5m /min Double insulation Weight 1.36 kg Staple your purchase receipt here Before returning this product for warranty or any other reason, please call� POSITEC AUSTRALIA PTY LIMITED ABN 14 101 682 357 Unit 15, 23 Narabang Way Belrose 2085 NSW Australia...
Need help?
Do you have a question about the ShopSeries RS8043 and is the answer not in the manual?
Questions and answers