JUMP SNAP Ropeless Jump Rope Instruction Manual

Table of Contents

Download this manual

JUMP SNAP

The Ropeless Jump Rope!

Instruction Manual

LCD DISPLAY [Illustration of LDC display and buttons of operation]

OPERATION:

Turn ON - PRESS and HOLD the MODE/ON key and DOWN key

simultaneously for 3 seconds.

Turn OFF – It shuts off automatically after 3 minutes of idle time.

1. User Profile (Recommended): Press MODE/ON key, "NO. 1" icon is

flashing, press UP or DOWN key to choose user 1 or 2, then press SET

key to confirm.

[Illustration showing close up of user profile display]

2. Height (Recommended): Press MODE/ON key, field displays "FT IN",

press SET key so Feet Position icon is flashing, then press UP or DOWN

key to adjust feet. Press SET key so Inches Position icon is flashing,

then press UP or DOWN key to adjust inches. (Default height: 5 feet)

[Illustration showing close up of height display]

3. Weight (Recommended): Press MODE/ON key until "WT" icon

displays, press SET key, then press UP or DOWN key to adjust weight

(Default weight: 150 lbs, weight range 0 – 330 lbs)

[Illustration showing close up of weight display]

4. Target Jumps Alert (Optional): Press MODE/ON key until display "T1",

then press SET key, thousandths digit and hundredths digit are

flashing, press UP or DOWN key to adjust and then press SET key to

confirm. Repeat for tenths digit and ones digit while flashing, using UP

or DOWN key to adjust, then press SET key to confirm. When the user

reaches their target number of jumps, the unit will alert the user with a

"beep beep" sound.

[Illustration showing close up of target jumps alert display]

5. Target Jump Time Alert (Optional): Press MODE/ON key until lower

right LCD displays "T2", then press SET key causing minutes to flash,

press UP or DOWN key to adjust. Then press SET key, causing the

Table of Contents

Do you have a question about the Ropeless Jump Rope and is the answer not in the manual?

Page 1 JUMP SNAP The Ropeless Jump Rope! Instruction Manual LCD DISPLAY [Illustration of LDC display and buttons of operation] OPERATION: Turn ON - PRESS and HOLD the MODE/ON key and DOWN key simultaneously for 3 seconds. Turn OFF – It shuts off automatically after 3 minutes of idle time.
Page 2 SET to reset the stop watch. [Illustration showing close up of stop watch display] 7. Jump Snap Sound Effect (Recommended): If the Jump Rope Icon is seen in the upper right LCD then the unit is set to make the snapping sound.
Page 3 * Press any key for blue backlight and it will stay lit for 10 seconds. * RESET key located on the back of the unit will reset all data. Simply place a thin object like a paper-clip into the designated RESET hole if this function is needed.
Page 4 Jump Rope Icon Signifies Snap sound ON Upper right Feature List and Descriptions: Feature Name Maximum Description Jump Time 99 minutes 59 seconds Calculates how long the user jumps. Jump Counter 9999 Jumps Calculates the number of jumps. Calorie Counter 999 Calories Calculates the approximate number of calories burned based on the user's height, weight and workout...
Page 5 3 minutes. Key Guard Protects the unit from turning on accidentally thus preserving the battery. JumpSnap The Ropeless Jump Rope! www.jumpsnap.com Copyright 2006 © JumpSnap, All Rights Reserved. Jumpsnap and the Jumpsnap logo are registered marks of Under Sail Marketing, LLC...