Advertisement
8FT X 10FT (2.4m X 3m)
DOME POP UP SUN SHELTER
MODEL:
BS15020B BS15020R
BS15020G BS15020W
Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding item
numbers as well as the name of the store where you purchased the item.
4. Please gather all of this information BEFORE you call customer service.
STOP!
Missing A Part?
No Need To Go Back To The Store!
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged.
Please e-mail:
afterservice@sunbaycompany.com
or Call Toll Free
TEL:1-800-730-5292
between 9:00am--4:00pm
Eastern Time Monday through
Friday
Advertisement
Table of Contents
Related Manuals for Game Day Gear BS15020B
Summary of Contents for Game Day Gear BS15020B
- Page 1 DOME POP UP SUN SHELTER STOP! MODEL: Missing A Part? No Need To Go Back To The Store! BS15020B BS15020R The store where you made your purchase does not stock parts for this item. If you need parts, BS15020G BS15020W whether they are missing or damaged.
- Page 2 WARNING: Keep all flame and heat sources away from this sun shelter fabric. This sun shelter is made with fabric that meets CPAI-84 specifications for flame resistance. It is not fire proof.The fabric will burn if left in continuous contact with any flame source.
- Page 3 ASSEMBLY INSTRUCTIONS SPECIAL NOTICE: * Make sure that you lay out and identify all parts listed below in the part list. * It is recommended to open this product with 2 or more people. AVISO ESPECIAL: * Asegúrese de que se separe e identifique todos los componentes enumerados a continuación en la lista de piezas.
- Page 4 INSTRUCTIONS ASSEMBLY NOTE: Pls push this button when you close the sun shelter. NOTA: Por favor, pulse este botón cuando se cierra el refugio sol. REMARQUE: S'il vous plaît appuyez sur ce bouton quand vous fermez l'abri du soleil. Step 1: 1) Easily open the sun shelter in four directions until partially extended.
- Page 5 INSTRUCTIONS ASSEMBLY rope Figure 1 Step 2: Step on the black triangular base.Adjust the canopy height by lifting the leg until the leg locks into place,please see FIGURE 1.Do the same for the remaining 3 legs. Paso 2: Paso en la parte posterior base.Adjust triangular de la altura de la copa al levantar la pierna hasta que la pierna cerraduras en su lugar, por favor ver FIGURE 1.Do el mismo para las 3 patas restantes.
- Page 6 INSTRUCTIONS ASSEMBLY Figure 4 Figure 3 rope rope Figure 2 Step 3: 1) Insert one steel stake B into a hole on the black plastic base,please see FIGURE 2, to secure the canopy to the ground,do the same on other 3 bases. 2) Tie rope C to the plastic ring on the corner of the canopy fabric,please see FIGURE 3.Tie the other end to the ground stake,please see FIGURE 4.Adjust the tension on all 4 ropes for additional support.
Need help?
Do you have a question about the BS15020B and is the answer not in the manual?
Questions and answers