ALDI RP-ALGE-M User Manual page 7

Garden Utility Cart
ASSEMBLY INSTRUCTIONS - continued
3. FRONT AXLE ASSEMBLY
a). Attach the front axle support (J) to the bed (A) by
using two carriage support bolts which are welded
onto the bed and two 8 mm washers (FF) and two
8 mm lock nuts (GG). (see Fig. 2)
b). Attach the Yoke (L) to the front axle support (J)
by using the retainer washer (MM) and cotter
pin (L). (see Fig 2.1)
c). Attach the center front axle brace (K) and yoke (L)
to the front axle support (J) by using long steering
bolts (OO), 6 mm washers (QQ) and 6 mm lock nut
(PP). (see Fig 2.2)
d). Attach the steering link connector (M) to the front
axle support (J) and yoke (L) by using three short
steering bolts (NN), 6mm washers (QQ) and 6 mm
lock nuts (PP). (see Fig 2.2)
NOTE: Leave at least one full turn on each bolt
connection to allow for smooth steering operation.
Hardware Used
2
2.1
2.2
5
User Manual
7