Page 2
(for additional information, see inside back cover or visit aldonco.com). Aldon® SPOT CHECK MAGNETIC LASER GAUGE should arrive to you fully assembled, inspected for accuracy, and ready to use. If the laser is reset to factory defaults follow these simple steps to setup the laser.
Page 3
5/8” below the top of the rail. The measurement will be displayed on the screen. If you want/need to pause from taking measurements, press the red arrow key on the keypad. RED ARROW KEY Aldon Company, Inc. | 847.623.8800 | e-rail@aldonco.com | ALDONCO.com...
Page 4
Aldon® SPOT CHECK MAGNETIC LASER GAUGE makes quick and precise measurements of overhead track clearance. To measure overhead clearance, simply orient the laser vertically as shown on the left. Have A Question? “ASK ALDON” AskAldon@aldonco.com Aldon® Spot Check Magnetic Laser Gauge #4022-26...
Page 6
Replacement Derail Sign Plate 4015-71 Blue 4015-72 Red SaberTooth® Portable Derail Left Throw 4014-06-S Derail Padlock 3/8” x 2-2/2” Shackle 4124-97 SaberTooth® Portable Derail Right Throw Additional Derails and 4014-07-S Derail Accessories Available Aldon® Spot Check Magnetic Laser Gauge #4022-26...
Page 7
Have A Question? Additional Sign Holders Available “ASK ALDON” Sign Plates Sold Separately AskAldon@aldonco.com Have A Question? ALDONCO.com Visit to view our wide range of derails, sign holders, track repair products and more. Aldon Company, Inc. | 847.623.8800 | e-rail@aldonco.com | ALDONCO.com...
Need help?
Do you have a question about the 4022-26 and is the answer not in the manual?
Questions and answers