Summary of Contents for Snow Business SB200 Booster
Page 1
Read the service and maintenance manual carefully before using the machine and take note of the safety Instructions to avoid potential dangers. Store the operating manual away safely for future reference. More copies of the operating manual may be obtained from Snow Business. Machine types: SB200B 230V 4 amps...
1 General safety instructions The falling snow machine in question is assembled with moving and electrical parts. Misuse or non- observance of the safety instructions may have serious consequences for the operator and his/her health and could result in injury Maintenance should be carried out by suitably qualified persons only, In addition, they must have read the service and maintenance section of the manual accurately and must adhere to the safety instructions:...
1.3 Intended use This machine is to be used for the purpose of creating an artificial falling snow effect using only fluids recommended by Snow business. 1.4 Guarantee and liability Guarantee related claims and demands of liability following injury to people and damage to property are invalid when they are traced back to one, or more of the following causes: •...
Snow Business International offers reliable and fast after sales service with every machine delivered. For answers to technical questions, or questions about servicing, please contact us during our office hours which can be found on our website. 2.2 Explanation of symbols and instructions For greater clarity and to emphasize instructions related to safety, the following icons will be used: This symbol indicates real danger threatening the lives and health of people.
2.4 Informal safety measures The operating manual must be stored at the place of operation at all times. In addition to the operating manual, the generally prevailing and local rules for accident-prevention and environment protection must be kept at hand and observed. All safety and danger instructions on the machine must be kept in a condition which ensures their legibility.
72 db @ 1 meter. 2.12 Copyright Copyright on this operating manual remains with Snow Business Ltd. The operating manual is intended for the use of the operator and his/her staff only. It contains information and instructions which may not be:- •...
2.16 Installation site Inside the casing of the machine are many different electrical units. While these are waterproof It is best that the machine is stood on dry ground, not only while it is working, but also when it is switched off and resting. It is advisable in hot weather not to stand the machine in direct sunlight as this may cause overheating of the internal parts of the machine.
The SB200 Booster when used in conjunction with an SB200 Winter base unit produces an artificial falling snow effect by combining snow fluid, water and air together to form dry foam. The SB200 Booster machine’s booster fan is designed to be activated via a wired remote control driven from the SB200 Winter base unit or manually via the 3 position selector switch on the SB200 Boosters control panel.
3.2 The control panel SB200B Remote (dust cover in place) Main fuse 10 amp 240 V Auto/Off/On selector switch 4 Operating the machine 4.1 Loading and unloading of machine The machine may be moved using the handles on the main part of the outer case of the machine and its casters or by grasping the machine by both handles and lifting N.B.
4.2 Moving and setting up of machine The machine can be stood on a flat surface with its output nozzle vertical, at 45 degrees, or horizontal. When the machine is stood on a flat surface it must be in a place which satisfies the following conditions:- ...
There are no internal parts that can be maintained by the owner of an SB200B. In the event of a failure of any of the internal parts of the machine please contact Snow Business to arrange for repair. Unauthorised repairs will invalidate the machines warrantee and may place the operator in danger.
9 Technical Data Weight 44 kg Machine Dimensions (SB100T & TXT) 690cm long x 530cm wide x 1230cm high Current 4.0 Amps Power 900 Watts Voltage 220- 240 volt Noise Output Base unit 70 db, Gun 75db to 80db depending on fan setting. Permissible snow fluids Bioflake or Snowboy fluid Ingress protection...
Need help?
Do you have a question about the SB200 Booster and is the answer not in the manual?
Questions and answers