RV Solar Connection Medium Manual

Dual tilt rv mount

Advertisement

Quick Links

RV Solar Connection Medium Dual Tilt RV Mount Manual
Pinch Hazard - When installing and during normal operation of your dual
tilt mounts keep hands and fingers clear of end rails when raising or
lowering the photovoltaic modules. Raise and lower the module from
center of the module only.

Introduction:

Thank you for purchasing RV Solar Connection's (RVSC) dual tilt photovoltaic mounts.
Your dual tilt mounts are quick and easy to operate and come fully assembled. Once
installed no tools or extra parts are required to tilt your modules.
RVSC Dual Tilt Mounts are manufactured from 1/8" 5052 grade aluminum and are
designed specifically for Kyocera KC series photovoltaic modules.
RVSC Dual Tilt Mounts with their slotted module mounting holes are adaptable to
several other manufacturers' photovoltaic modules.
RVSC Dual Tilt Mounts accept most modules with mounting holes between 15.38" to
24.38" apart. Modules 25" or wider must be mounted to the end rails of the solar module
to access the Pivot knobs.
RVSC Dual Tilt Mounts can be adjusted from 0° (flat) to 56° of tilt angle, which
provides sufficient tilt for most North American latitudes. Cable slots located on the
bottom rail of the dual tilt mount accept 10 gauge or 8 gauge flat tray cable. This
convenient feature makes it simple to pass cabling from one module to the next creating
a nice "clean" install.
Although created for roof mounting on RV's. RVSC dual tilt mounts can also be easily
mounted on the wall or roof of any out building with bolts or lag screws.

Required Tools:

Not supplied
• 7/16" Box end or open end wrench
• 1/4" drive ratchet and 7/16" socket
• Cordless drill
• 1/4" Drill bit

Required Materials:

Not supplied
Up to 12 - 14 x 1" or 14 x 3/4" Hex head screws for mounting lower rail to RV roof
Sealant such as Kool Seal® roof patching cement or Dicor for sealing roof
penetrations
Up to 12 well nuts or anchors for thin skinned RV roofs
A buddy to help install
Please read and thoroughly understand all installation instructions before
installing the RVSC dual tilt mounts to your solar modules or RV.
RVSolarConnection.com/mounts.htm
Page 1 of 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Medium and is the answer not in the manual?

Questions and answers

Summary of Contents for RV Solar Connection Medium

  • Page 1 Introduction: Thank you for purchasing RV Solar Connection’s (RVSC) dual tilt photovoltaic mounts. Your dual tilt mounts are quick and easy to operate and come fully assembled. Once installed no tools or extra parts are required to tilt your modules.
  • Page 2 RV Solar Connection Medium Dual Tilt RV Mount Manual RVSolarConnection.com/mounts.htm Mounting Upper Rails to Module:  Step #1 - Mounting module to dual tilt mounts    For Kyocera KC series photovoltaic modules: 1. Remove the four 1/4” x 5/8” stainless steel module mounting bolts, serrated nuts and washers from the side slot of the dual tilt mount.
  • Page 3 RV Solar Connection Medium Dual Tilt RV Mount Manual RVSolarConnection.com/mounts.htm Mounting Lower Rails to RV Roof:  Step #2 - Mounting module to roof For concealed hardware mounting (as shipped) 1. With the RVSC dual tilt mounts mounted to the module and all 6 knobs tight, place module in desired location on roof.
  • Page 4 RV Solar Connection Medium Dual Tilt RV Mount Manual RVSolarConnection.com/mounts.htm Mounting Lower Rails to RV Roof:  Optional Step #2 - Mounting dual tilt module to roof For exposed hardware mounting The RVSC dual tilt mount can be converted into a z bracket type mount by removing the lower rail from the mounts and reversing them.
  • Page 5 RV Solar Connection Medium Dual Tilt RV Mount Manual RVSolarConnection.com/mounts.htm Mounting Lower Rails to RV Roof: Continued  Optional Step #2 - Mounting dual tilt module to roof We recommend using all 12 lower rail mounting holes (6 per side). Due to a wide variety roofing materials used on RV’s, it is up to you to determine...
  • Page 6 RV Solar Connection Medium Dual Tilt RV Mount Manual RVSolarConnection.com/mounts.htm Changing Tilt Direction Time: Less than 4 minutes 1. Remove pivot knobs from end of module nearest to you. Slightly loosen pivot knobs furthest from you. 2. Remove support arm knobs, lift module and rotate support arms to the other side of center.

Table of Contents