Before First Use - Prinetti IA3964 Instruction Manual

Before First Use

1. Unpack the product but keep all packaging material until you have made sure
your new Air Fryer is undamaged and in good working order. Plastic wrapping can
be a suffocation hazard for babies and young children so ensure all packaging
materials are out of their reach.
2. Remove the twist-tie which is securing the electrical
cord. Uncoil the cord and straighten it to remove
any kinks. Do not use the product if these parts are
damaged. In case of damage, phone the After Sales
Support Line on 1300 777 137.
3. Place the Air Fryer on a flat, stable and heat resistant
surface. Remove the pan with frying base from the Air
Fryer by holding the top of the Air Fryer with one hand
and pulling back on the handle with the other.
4. Ensure you remove any contents that may have
been packed inside the Air Fryer before turning the
appliance on or putting food into the pan.
5. To remove the frying base, use the handle found in the centre of the base and lift
upwards (see Fig. 1). Wash the pan and frying base in warm soapy water and dry
thoroughly.
6. Wipe the exterior housing and inner surface of the Air Fryer with a damp cloth and
then dry thoroughly. Do not immerse it in water or other liquids.
7. Place the frying base back into the pan and slide the pan back into the Air Fryer.
WARNING:
The pan will be very hot when removed from the Air Fryer. Ensure you
place the pan on a heat resistant surface.
NOTE:
You may notice a slight odour being emitted from the Air Fryer during initial
use. This is normal and the odour will cease with continued use.
CAUTION:
Never add oil directly into the pan. Mix the oil in a bowl with desired food
prior to placing into the pan.
10 AFTER SALES SUPPORT AU
1300 777 137 NZ
Fig. 1
0800 824 556 service@unclebills.com.au