Advertisement
Quick Links
Advertisement
Summary of Contents for AthletiCat Cat Litter Box Cabinet
- Page 1 ASSEMBLY INSTRUCTIONS – CAT LITTER BOX CABINET...
- Page 2 Take the BASE and place it with the 8 holes facing upwards. Use the cardboard as a support surface to avoid scratching the wood. Use a hammer to forcefully insert the plastic feet into the cabinet. Make sure they fit well, otherwise the cabinet will be unstable.
- Page 3 Turn the BASIC on itself, so that you can see the holes on the other side. Insert the 6 wooden pins and 4 metal pins as shown in the next picture.
- Page 4 Detail of the holes on one of the two sides. Insert the right side.
- Page 5 And the left side. Insert the 4 retainers into the holes, with the arrow pointing downwards (towards the BASIC, see red square in the picture), and screw in with a screwdriver...
- Page 6 Insert the back, with the white part facing outwards. Take the TOP and insert the 6 wooden and 4 metal pins as shown in the following picture.
- Page 7 Insert the TOP on the cabinet by matching the holes with the pins. Insert the retainers with the arrow pointing upwards (towards the TOP) and screw them in.
- Page 8 Take the door with the cat silhouette. Insert the 2 hinges and tighten the 4 small screws.
- Page 9 On the cabinet, on the left side, locate the holes of the hinge supports.
- Page 10 Mount the hinge supports by screwing them in at the 4 holes.
- Page 11 Infilate le cerniere dello sportello nei due supporti e avvitate.
- Page 12 The cabinet is ready for use. We recommend that you put a towel inside the cabinet to prevent any pee or dirty sand from coming into contact with the cabinet for too long. It is also a great way to make cleaning easier.
Need help?
Do you have a question about the Cat Litter Box Cabinet and is the answer not in the manual?
Questions and answers