saco Candy CIW 100T Operating Instructions

Advertisement

Quick Links

Operating Instructions – Washer dryer Candy CIW 100T

Control Panel

Description of Controls

B. Door Open Button
A special safety device prevents the porthole from being opened immediately after the end of the cycle. Wait for 2
minutes after the wash cycle ha finished before opening the door.
C. On/Off Button
Press to start the appliance. At the end of the cycle press again to reset the button and switch off the appliance.
D. EXTRA RINSE Button
By pressing the "EXTRA RINSE" button, even the slightest residue of detersive is removed from fabrics. This is
particularly important for people with delicate skins.
E. QUICK WASH Button
Pressing this button reduces the time of the wash programme by a maximum of 50 minutes depending upon the
programme selected. The quick wash button can be used for washing loads of 1 to 5kg. (This button can be utilised
only on cottons and synthetic programmes).
F. HIGH DRY Button
Recommended: press this button for extra intense drying cycle suitable for hard wearing fabrics e.g. towels, jeans.
H. WASH TEMPERATURE selector

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Candy CIW 100T and is the answer not in the manual?

Questions and answers

Summary of Contents for saco Candy CIW 100T

  • Page 1 Operating Instructions – Washer dryer Candy CIW 100T Control Panel Description of Controls B. Door Open Button A special safety device prevents the porthole from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle ha finished before opening the door.
  • Page 2 Can be turned in either direction This washing machine is equipped with this device for setting the wash temperature you want. We recommend that the temperature shown on the label inside garments should never be exceeded. I. DRYING TIME MINS CAUTION: Never turn knob anti-clockwise, but always clockwise.
  • Page 3 • Press On/Off button(C). Warning lights (M-N-O) will come on. • The drying time (I) will rotate automatically to zero. • • Drying will start with the programme dial (L) stationary on the symbol, or symbol, until the drying cycle ends, then it rotates to "Stop".

Table of Contents