Dynamic Billard 50.097.00.1 Quick Start Manual

Football table

Advertisement

Dynamic Billard Organisation GmbH
Konrad-Zuse-Str. 15, 66459 Kirkel-Limbach, Deutschland
Tel.: +49 (0) 6841 99303-0
vertrieb@dynamic-billard.de
Thank you for choosing one of Roberto Sport's products at Dynamic Billard. Our tables are famous for their quality
and accuracy of their components. Roberto Sport has been producing table soccer, pool and hockey tables for more
than 65 years. Huge experience and tradition, constant research and innovation have brought Roberto Sport's name
as a synonymous of the "Made In Italy" football tables all over the world.
Unpacking and assembly operation should be carried out entirely by adults. Keep children away throughout all steps.
All small parts such as bolts, screws etc., not yet assembled, and nylon bags might be swallowed or inhaled.
The model you just bought is for INDOOR USE. For this reason we suggest you to install it in sheltered environment,
with low humidity degree and direct sun bean free.
In order to keep your tables performance at a high level, we suggest you clean it periodically by using a humid dust
cloth. For difficult stain you may use abrasive-free detergents. For an utmost sliding rods: we suggest you get the
external part of the rod lubricated (the one in touch with the bushing) along with the rod's internal part by using
a silicon spray. Dynamic Billard uses and supplies a special silicon spray studied, produced and tested for
these purposes. Do not use grease; it holds the dust and might block the rod sliding. The telescopic rods assembled
on this table are of a highly safe. To prevent rods bending, we recommend you do not load weight on the
rods when extended.
For any problem you might have, or any info you might need, do not hesitate to visit our web site:
www.dynamic-billard.de
Roberto Sport has a two- year warranty for its products starting from the acquisition date. Warranty covers
manufacture defects only; it doesn't cover damages caused by misuse or assigned to be due to wear & tear. A
manufacture defect must be reported at the earliest by a written communication within two months. A written
notification must be sent to the vendor. Roberto Sport is committed to restore the table with no charge on the buyer
by repairing or replacing the damaged part/parts or by offering a discount.
www.dynamic-billard.de
/
COLLEGE

GENERAL WARNINGS

CARE & MAINTENANCE
vertrieb@dynamic-billard.de
or contact us at:

WARRANTY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 50.097.00.1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dynamic Billard 50.097.00.1

  • Page 1 COLLEGE Thank you for choosing one of Roberto Sport’s products at Dynamic Billard. Our tables are famous for their quality and accuracy of their components. Roberto Sport has been producing table soccer, pool and hockey tables for more than 65 years. Huge experience and tradition, constant research and innovation have brought Roberto Sport’s name as a synonymous of the “Made In Italy”...
  • Page 2 PARTS LIST Lubricant spray balls Scoring unit Material for legs assembly Screw 8x40 Metal flat 8x32 Flange nut diam. 8mm Allen spanner 5mm Screw 4,5x16 Material for rods assembly Screw 5x20 Set complete of rods...
  • Page 3 ASSEMBLY INSTRUCTIONS The football table is packed in a carton box with the rods and legs to be assembled. The assembly operation is very simple and needs about 30 minutes. To start please follow the below instructions. Please read and keep these instructions for future reference. Legs assembly...
  • Page 4 Rods assembly Fixing aluminium border top...

Table of Contents