Download Print this page

Common Questions - Unitechi M1-PD User Manual

Advertisement

Charge mobile phone, smartphone or other digital device
1. Connect the device to the power bank with the original or certified charging USB cable.
2. The power bank and digital device are in charging mode when connecting is finished.
3. Pull out the charging cable after the phone or digital device is fully charged.
Notice
iPhone and other non Quick Charge devices will charge at normal speed.
Some USB-C devices that require an input over 30W may not be compatible.
Use original or certified cables.
Before charging the phone or digital device, please carefully check the input
voltage and current. If it doesn't apply to this product but is being forcibly
charged, it may cause a bulge of a battery cell of a device, that is being charged,
lower the lifetime of its battery cell or even damage the device.
Warning
1. When charging the power bank, please use the Wall Charger 18W (30W or higher), USB port
of a computer or source of output voltage 5V.
2. Before charging any device, please check the voltage of a device if it is compatible with power
bank or not.
3. If you will feel any abnormal smell, notice that the power bank becomes really hot, see the
changing of the color or shape or any other abnormalities please stop using the power bank and
contact the manufacturer / seller immediately.
4. If you are using power bank for a first time, charge it fully. If you are not using power bank for
a long time, charge it every 3 months. It is normal if the temperature of a power bank will rise a
bit when it is being used.
5. Please be sure the power bank is charged when charging any digital device.
6. Pull out the charging cable when device is fully charged to eliminate the power loss.
7. The warranty doesn't cover the damage that was caused by incorrect usage or incorrect
placement.

Common questions

Power Bank can not be charged ?
Solution
�� Connecting way is wrong
�� The joint of the charging cable is loose
�� Charging cable is damaged
�� Other reason
Power Bank can not charge other devices ?
Solution
�� Connecting way is wrong
�� Charging cable or adapter are damaged
�� The joint of the charging cable is loose
�� Voltage is too low, please recharge the power bank
�� Power bank is defected, please contact local distributor / seller

Advertisement

loading