This product is a fully automated, touchless stylus dispenser. You don’t need to physically touch the unit to get a Recyclable FreeStylus. Simply wave your hand in front of the sensor and it will dispense a single stylus for your use.
Recyclable FreeStylus. 1. Follow the directions in section 2.2 to open the front cover. 2. Open a pack of FreeStylus pens and carefully lower them into the dispenser, being sure to have all stylus pens positioned parallel to the front of the dispenser.
Page 13
Hole Details: Ø0.21" (5 mm) There are six keyhole slots and four pass through holes on the back face of the FreeMotion Dispenser. The keyhole slots are intended for wall mounting the dispenser with drywall anchors. The 4.43" (112 mm)
Page 16
3.4 Countertop Installation Placing the FreeStylus Dispenser on a Counter: The FreeMotion dispenser has been designed for countertop placement. It includes rubberized feet for better stability on counter top surfaces, and a hinge point that keeps the front cover from colliding with the counter when opened.
Need help?
Do you have a question about the FreeMotion and is the answer not in the manual?
Questions and answers