Summary of Contents for BANGQI F3650
- Page 1 MOTORIZED TREADMILL OWNER’S MANUAL Thank you very much for purchasing our product. Please read this manual carefully before use it and keep the manual at proper place.
- Page 2 CAUTION: User weight on this product should not exceed 110 kgs. Should not be undertaken without first consulting a physician. No specific health claims are made or implied as they relate to the equipment. Measurements made by the equipment are believed to be accurate, but only the measurements of your physician should be relied upon.
- Page 3 SAFETY INSTRUCTIONS Observe the following prior to use of the treadmill: DANGER: To reduce the risk of electric shock, please observe the following: Always unplug the treadmill from the electrical outlet immediately after using and before cleaning, assembling or servicing. NOTE: Failure to follow these instructions may lead to personal injury and cause damage to the treadmill.
-
Page 4: Safety Instructions
WARNING: C onnect the treadmill to properly grounded outlet only. SAFETY INSTRUCTIONS This product must be grounded. If it should malfunction or break down, Ÿ grounding provides a path of least resistance for electric current reducing the risk of electric shock,*This treadmill is equipped with a cord having equipment grounding connector and a grounding plug. -
Page 5: Starting Your Workout
STARTING YOUR WORKOUT Please tight up all screws before start it. Ÿ Connect the Power Cord to a electrical outlet and press the Power Switch. The Ÿ equipment is ready for use. Ensure you warm-up well before using the equipment as this will help to Ÿ... - Page 6 ASSEMBLY INSTRUCTIONS: When you open the carton, you will find the following components TOOLS & HARDWARE KIT: Flat Washer Flat Washer Screw Screw Fixing Knob Safety key Silicone Oil Hex Wrench-T Tablet Holder End Cap Screw Cup Holder Tablet Holder Cub Holder Wheel Fix Knob...
- Page 7 ASSEMBLY INSTRUCTIONS Warning: Do not connect the Treadmill to a power source before completing assembly. Open the carton, remove the main frame and the components and place it on the floor in an open area. STEP 1: ② Screw+Flat Washer (5+3) ①...
- Page 8 CAUTION & INSTRUCTION: Before beginning a workout session ensure Safety Key is properly attached onto the Console and Safety Clip is securely attached to an article of your clothing. Always begin treadmill standing on the side rails not on the running belt. Allow the treadmill to reach a speed of at least 1.0km/h, before walking on the running belt.
-
Page 9: Console Instruction
CONSOLE INSTRUCTION SPEED CALO. PULSE TIME MODE OPERATION(MANUAL) 1.Plug the power,then place safety key on the computer and turn one the power switch which is located at the front of the treadmill 2.The all window will display “--”.Then press the “START/STOP” key to start the treadmill,after 5 second countdown,the treadmill will start at the speed of 1.0KM/H. - Page 10 DISPALY WINDOW AND KEY 1.Three windows display:SPEED,TIME,DISTANCE,CALORIE,PULSE,PROGRAM. 2.Functional keys:SPEED+,SPEED-,START/STOP,MODE,PROGRAM. 3.When the dispaly window shows “- - -” place the Safety key into the computer for activate operations. 4.For emergency stop,remove the Safety key.The running belt will stop automatically and the window will display“- - -”. MODE KEY 1.Press the “MODE”...
- Page 11 PROGRAM(PROG) KEY 1.Before starting treadmill, press the “PROG.” button to select program, you may select P1, P2, P3, P4, P5, P6, P7, P8, P9, P10, P11, P12. 2. The TIME window will display a flashing preset time 30:00 minutes, press the “+” or “-” to increase or decrease desired workout time.
- Page 12 Before completing an exercise session always: 1. Allow time to slow your cool down, reducing your heart rate to a normal level before completing your workout. 2. Grasp the handlebar and press the slow speed key. Slow your pace to an easy walk. 3.
-
Page 13: Running Belt Adjustment
RUNNING BELT ADJUSTMENT a) Adjust speed to 3km/h b) If the running belt is deflecting to the right, adjust the bolt on the right one half turn clockwise using the allen key, and adjust the bolt on the left one half turn anti-clockwise (see pic 1) c) If the running belt is deflecting to the left, adjust the bolt on the left one half turn clockwise using the allen key, and adjust the bolt on the right one half turn... -
Page 14: Height Adjustment
HEIGHT ADJUSTMENT: This Treadmill has been designed equipped with 3 level height adjustment function,you can adjust the height by Pins. NOTE: Ensure that both sides pins adjusted evenly. OVERVIEW DRAWING 19 20 16 17 18... -
Page 15: Parts List
PARTS LIST Name Name Manual incline Screw End cap Hold heart rate L Rear roller Screw screw Running board Computer under cover Front roller Upright tube L Running belt Motor cover Side rial Power switch Washer Support pedestal Screw Motor Power cord Down connect line Belt...