Advertisement
Quick Links
Advertisement
Summary of Contents for AccuBoom Parallel
- Page 1 Universal Parallel Cable...
-
Page 3: Components Needed
AccuBoom system. See the Viper Installation and Operators Manual for instructions on setting up the software and using the AccuBoom system. You will also need a valid AccuBoom Control Activation Key for your Viper system in order to activate the AccuBoom system. - Page 4 AccuBoom Universal Parallel Cable Installation Manual Notes:...
- Page 5 Manual # 016-0171-021 H A P T E R N S T A L L A T I O N Use the following procedure to properly install the Universal Parallel AccuBoom cable: 1. Disconnect the existing console cable. Note: The Universal Parallel AccuBoom cable is compatible with the Raven SCS440, SCS450, SCS460, SCS660, and SCS661 consoles only).
- Page 6 2. Connect the AccuBoom cable: a. Connect the Universal Parallel AccuBoom cable (P/N 115-0171-500) to the back of the Raven console. b. Connect the other connector on the Universal Parallel AccuBoom cable (P/N 115-0171-500) to the console cable previously disconnected from the console.
- Page 7 Identify a location for the Parallel AccuBoom node (P/N 063-0172-517) that will protect it from the elements as much as possible. b. Bolt the Parallel AccuBoom node (P/N 163-0172-517) securely in place. 5. Connect the AccuBoom cable to the AccuBoom node:...
- Page 8 If the master switch can not support sufficient current capabilities, wire in a relay to handle the needed current. b. Connect the 15 pin D-sub connector from the Parallel AccuBoom Universal cable (P/N 115-0171-500) to the mating 15 pin D-sub connector on the Viper cable.
- Page 9 Manual # 016-0171-021 7. The Parallel AccuBoom installation is now complete. Install the Activation Key in the Viper system and program the look-ahead value in the AccuBoom look-ahead setup screen. See the Viper Installation and Operators Manual (P/N 016-0159-894) for more information on...
- Page 11 RAVEN INDUSTRIES LIMITED WARRANTY WHAT IS COVERED? This warranty covers all defects in workmanship or materials in your Raven Flow Control Product under normal use, maintenance, and service. HOW LONG IS THE COVERAGE PERIOD? This warranty coverage runs for 12 months from the purchase date of your Raven Flow Control Product.
- Page 12 Raven Industries Toll Free 800-243-5435 Flow Controls Division Fax 605-331-0426 P.O. Box 5107 www.ravenprecision.com Sioux Falls, SD 57117-5107 fcdinfo@ravenind.com...