FXP CD-220 VFD User Manual

FXP CD-220 VFD User Manual

Customer pole display

Advertisement

 
FX
XP C
CD-
-22
20 V
VFD D
Custo
omer
Pole D
Displa
ay
User
r's Ma
anua
l
 
Edition:
May 201
5
Vers
sion 2.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD-220 VFD and is the answer not in the manual?

Questions and answers

Summary of Contents for FXP CD-220 VFD

  • Page 1   XP C 20 V VFD D Custo omer Pole D Displa User r’s Ma anua   Edition: May 201 Vers sion 2.0...
  • Page 2 PREFACE Federa al Comm municat tions Co ommiss sion (FC   This equ uipment h as been t tested and d found to o comply with the l imits for a Class A digital d evice, pu rsuant to part 15 o of the FCC C Rules.
  • Page 3 Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.  Intel is a registered trademark of Intel International Inc.  Other software or product names used in this manual are the properties of  their respective owners and are acknowledged.   Customer Pole Display CD-220 VFD...
  • Page 4 6. Do not place heavy objects on top of the product or lean them against the product. These items may fall down and cause injury. Do not block the air vent of the product as this can cause heat accumulation inside the box machine and may cause a fire.   Customer Pole Display CD-220 VFD...
  • Page 5: Table Of Contents

      Table Of Contents   CHAPTER 1 INTRODUCTION ..........1   Unpacking ..............1     Feature ................ 2     Specification ..............3     CHAPTER 2 INTERFACE ............4   2.1 Phone Jack Connector to Display ........4  ...
  • Page 6: Unpacking

    1 isplay Pan and Base Short Po ole: 117 m mm x 1  Access sory Kit:       Driver CD For Dua al Interface e Cable (User’s Manual in ncluded) ustomer Pol le Display C CD-220 VFD...
  • Page 7: Chapter 1 Introduction

    Full speed data transfer using the USB 2.0 protocol. RS-232C Interface with baud rates selectable from 9600 to 115200 bps. 11. Mechanical: Provides a wide range of rotation and tilt angles. Selectable pole length for best position installation. Customer Pole Display CD-220 VFD...
  • Page 8: Specification

    200 x 120 x 27 mm Weight N.W. 0.8kg Environment EMC & Safety CE/FCC Class A Operation Temperature 5~45℃ Storage Temperature -20~70℃ Operation Humidity 15%~80% RH Storage Humidity 10%~90% RH Mechanical Housing Color Black / White Customer Pole Display CD-220 VFD...
  • Page 9: Chapter 2 Interface

    Function Illustration Ground Data - Data + VBUS Output Transmit Data Output Data Set Ready Input Receive Data   Input Data Terminal Ready Input Ground                     Customer Pole Display CD-220 VFD...
  • Page 10: Rs232 C Connector

     USB 1 Pin a assignm ment n No. ignal lustratio in 1 in 2 ata – in 3 ata + Type A  in 4       ustomer Pol le Display C CD-220 VFD...
  • Page 11: Chapter 3 Installation

    CHAPTER 3 INSTALLATION   The CD-220 VFD Customer Pole Display is easy to install by following the instructions in this chapter. No special training or tools are necessary. As this manual contains required information on the installation and programming of CD-220 VFD Customer Pole Display, it is recommended that you read the entire manual carefully prior to initiating installations.
  • Page 12 Displa ay Panel. (2) Pull t the tab do ownward and tilt t he panel up or dow wn to the desired p position. ustomer Pol le Display C CD-220 VFD...
  • Page 13: Configuration

    Before you start the installation, ensure that the host computer and the CD-220 VFD Customer Pole Display are powered off.   Step 2 Connect all the dual Interface cable Step 3 Start the host PC and switch on the display. Customer Pole Display CD-220 VFD...
  • Page 14: Driver Installation

    In case your USB port is in CDC class and your application software is connected by USB port, you must install the driver: Pic 2 -Click CD-220 VFD CDC Class as Pic 2. -check the device manager to find the COM port number as below. Pic 3...
  • Page 15: Before Starting

    CONFIGU URE YOUR D DEVICE CHAP PTER 4 4 CO ONFIG URE Y YOUR DEVIC The syst tem param meters of CD-220 V VFD can b be set by using VFD D Utility s software tool. You u can find d the tool in the com mpanion...
  • Page 16 If the mo odel nam e does no ot match with your r device, t the config guration may not t take effe ect.   ustomer Pol le Display C CD-220 VFD...
  • Page 17: Chapter 4 Configure Your Device

    After all items are set to desired condition, press SET button to send all the settings to your device. These settings will be stored on the non-volatile memory. Every time when you start the device, these settings will be retrieved from non-volatile memory. Customer Pole Display CD-220 VFD...
  • Page 18 CONFIGURE YOUR DEVICE 4.2.1 Command Type The CD-220 VFD supports up to 8 command sets. They are listed on the following table. Please select one from the pull-down list. Command Type Default EPSON ESC/POS DSP-800 (option) ADM787/788 (option) EMAX(AEDEX) UTC/S...
  • Page 19: Define Welcome Message

    Msg2 is displayed on lower line in marquee status. You can type the character on keyboard in ASCII mode or type others in Hex mode. Press Set button to send the messages to the machine. Customer Pole Display CD-220 VFD...
  • Page 20: Define Your Own Font

    “Download to device”. If you want to quit current modification, you can press “Reload font” button to load the font again. All your modification will be lost after reloading font. Press “Reset” button also let you abandon current modification and restart the whole operation. Customer Pole Display CD-220 VFD...
  • Page 21 After finishing your edit, you can save font to a file or download the font to device. It is a difficult job to build font from zero. It is recommended to build your font from existing font. Customer Pole Display CD-220 VFD...
  • Page 22: Chapter 5 Software Setting Command

    STX 05 P n ETX STX 05 E N ETX ASCII Format [02][05][80] n [03] [02] [05] [69] [78] [03] n=48,49 Dec. Format [02h][05h][50h] n [03h][02h][05h][45h][4eh][03h] n=30h,31h Hex. Format Description Parity check None parity Even parity Customer Pole Display CD-220 VFD...
  • Page 23: Command Type Setting Command

    Character Set Code Table (80H-FFH) (20h–7Fh) U.S.A. PC-437 (USA, Standard Europe) France Germany U.K. Denmark I PC-858 Sweden Italy Spain Reserved Norway PC-858 Denmark II U.S.A. Slavonic U.S.A. Russia U.S.A. PC-860 (Portuguese) U.K. Greek User Font Customer Pole Display CD-220 VFD...
  • Page 24: Chapter 6 Command Set

    01h n=01 on, n=00 off US MD1 1F 01 Specify overwrite mode. US MD2 1F 02 Specify vertical scroll mode. US MD3 1F 03 Specify horizontal scroll mode. US @ 1F 40 Execute self-test. Customer Pole Display CD-220 VFD...
  • Page 25 US T h m 1F 54 h m Display time 00h≦h≦17h 00h≦m≦3bh US U 1F 55 Display time continuously US V n 1F 56 n Status confirmation by DTR signal 00h≦n≦01h     Customer Pole Display CD-220 VFD...
  • Page 26: Adm787/788 Mode Command Set (Option)

    Clear line blinking, n=31h, 32h n=31h upper line; n=32h bottom line Clear field 3 (upper-right line) and move cursor to the first position Clear field 4 (bottom-right line) and move cursor to the first position Customer Pole Display CD-220 VFD...
  • Page 27: Emax (Aedex) Mode Command Set

    Horizontal tab Line feed Carriage return 10 n Display cursor position 00h≦n≦27h Over write display mode Vertical scroll mode Cursor on Cursor off Clear display ESC d 1B 64 Change to UTC enhanced mode     Customer Pole Display CD-220 VFD...
  • Page 28: Cd5220 Mode Command Set

    1B 51 44 [d1, d2…dn]xm 0D Upper line message scroll m≦40 continuously (see Note 2) ESC [ D 1B 5B 44 Move cursor left Move cursor left ESC [ C 1B 5B 43 Move cursor right Move cursor right Customer Pole Display CD-220 VFD...
  • Page 29 01h≦n≦04h (=brightest) US X n 1F 58 n Brightness adjustment 01h≦n≦04h (=brightest) ESC & s n m 1B 26 1 n m Define download characters [a(p1..pa)]x [a (p1..pa)] x (m-n+1) 20h≦n≦m≦ FFh (m-n+1) 1≦a≦5 p1...p5=row1...row5 Customer Pole Display CD-220 VFD...
  • Page 30 Slavonic ‘R’ Russia 4. The parameters of the code table control command “ESC c n”. Parameter “n” International Font Set ‘A’ Compliance with ASCII code ‘L’ Compliance with SLOVONIC code ‘R’ Compliance with RUSSIA code Customer Pole Display CD-220 VFD...
  • Page 31: Dsp-800 Mode Command Set (Option)

    Layer 5 Denmark I Sweden Show mode Italy bit 0=1 Show mode 1 Spain bit 1=1 Show mode 2 Japan Table 5-D Layer table for saving data Norway Denmark II Table 5-C International Font Set Customer Pole Display CD-220 VFD...
  • Page 32: Chapter 7 Character Set

    Ñ Spain ¡ ¿ ¨ ñ ¥ Japan É Å Ü Norway ¤ Æ Ø é æ ø å ü É Å Ü Denmark II Æ Ø é æ ø å ü Slavonic Russia Portuguese Customer Pole Display CD-220 VFD...
  • Page 33: Character Code Page (80H-Ffh)

    Î Ï ┘ ┌ █ ▄ ▌ ▐ ▀ Ó ß Ô Ò õ Õ μ þ Þ Ú Û Ù ý Ý ¯ ´ ¯ ± ¾ ¶ § ÷ ° ¨ ˙ ■ Customer Pole Display CD-220 VFD...
  • Page 34 ▐  ┘ █ ▄ ▀ ∩ α  ß  Γ  π  Σ  σ  µ τ  Φ Θ Ω δ  ∞ ø  ε  ≡  ⌠  ⌡  ° • · ² ■ ±  ≥  ≤ ÷ ≈ √  Customer Pole Display CD-220 VFD...
  • Page 35 Í Î Ï ┘ ┌ █ ▄ ▀ Ó ß Ô Ò õ Õ μ þ Þ Ú Û Ù ý Ý ¯ ´ ° ¯ ´ ± ¾ ¶ ÷ ¨ ■ • ¯ Customer Pole Display CD-220 VFD...
  • Page 36 ð ñ ò ó ô õ ö ÷ ø ù ú û ü ý þ ÿ UP VIAL‐CAS  220037, Republic of Belarus, Minsk, Lane Kozlova, 3a-7 Tel.: +375 17 2450128 Fax: +375 17 2451402 www.cas.by  sales@cas.by Customer Pole Display CD-220 VFD...

Table of Contents