Stinger 2021 Assembly Guide 1. Parts included in the BOX Headset FSA No55R 1.5” CR STD Stem & Spacers FSA SMR Stem, for integration cables Spacers 1cm X 1pc, 2cm X 2pcs Expander For ID 23mm fork Mini Clamp Clamp on the setpost...
Stinger 2021 Assembly Guide 3. Brake Hose Routing Chain stay height 25mm Front Brake Hose A single brake hose can pass through the fork steerer, so it doesn't require a connector bushing. Rear Brake Hose If the rear brake is on the right hand, route the hose around the drive side of the fork inside the headtube.
Stinger 2021 Assembly Guide Step 2 Step 1 4. Electric Wire Routing & Installation Step 1 Secure battery in the Di2 Battery Collar. Make sure to align the grooves. Step 2 Insert all cables through the compression ring opening, and upper bearing and bearing cap.
Stinger Step 1 2021 Assembly Guide 5. Mechanical Cable Routing & Installation - SRAM Step 1 All cables go through the compression ring opening, the upper bearing and the bearing cap. Step 2 Feed the cables through the frame. Step 2 For a SRAM front derailleur, there needs to be an alloy cable stop.
Stinger 2021 Assembly Guide Step 1 6. Mechanical Cable Routing & Installation - Shimano Step 1 All cables through the compression ring opening, and upper bearing and bearing cap. Step 2 Feed the cables through the frame. Step 2 For Shimano groupsets, all mechanical cable hoses connect directly to the derailleurs.
Stinger 2021 Assembly Guide 7. Mini Clamp & Clamp Installations Clamp The seat post is secured via two clamps. M5, Max Torque 6Nm Mini Clamp The mini clamp should be mounted on the seatpost prior to installing the seatpost. It has two functions: 1.