Preface Thanks for choosing 1507 IoT lock. On behalf of Yeeka team, we thank you for your purchase. The instructions in this manual provide technicians with information on the installation, operation, and setting of the 1507 IoT lock.Please supervise inexperienced users to ensure pleasant and safe operation.
Toten, Panduit, CPI and etc. 5.The electronic lock can connect various intelligent PDU or control unit for remote communication and control. 6.The appearance of the product is simple and elegant, easy to use and convenient to install and maintain. yeeka www. .com...
⚫ Set the lock area ⚫ Manage lock and control unit Data Analysis User Management ⚫ Data analysis of unlocking ⚫ Data analysis of temperature ⚫ User authority management and humidity ⚫ User department management ⚫ Data analysis of other sensors yeeka www. .com...
Wiring Diagram Pin No Color Signal Definition Wire Gauge 12V + Black Yellow 485+ Green 485- UL2464/26AWG White Blue Orange lock status Brown lock status Functional schematic diagram 3.4.1 Password functional schematic diagram yeeka www. .com...
Long press for three seconds to restore the factory settings. Bar code Contains lock Setting button for fingerprint or card hardware information Back 3.4.5 Head functional schematic diagram External power interface Interface type: type-c Used for emergency power supply unlock yeeka www. .com...
Use the mobile APP to scan the QR code in the QR code recognition area of the lock and operate it on the mobile phone;at this moment the lock status LED turns from blue to green with blink and the buzzer sounds three times. When green of the lock status yeeka www. .com...
Long press 1 Programming Password # 17 # successfully verified. After successful card verification, another set of passwords must be verified. password + password (no requirement for the sequence of two groups of passwords) card + password (card always before password) yeeka www. .com...
Shortly press the “fingerprint setting” button and then put seconds. The beep indicates that the fingerprint Add finger print your fingerprint in the authentication area for needs to be further authenticated.The successful authentication beep indicate that the authentication is successful. yeeka www. .com...
Controller instructions Functional diagram Program Reserved Connect Indicator Connect with Ethernet Button to Power upgrade antenna with IoT lock light door sensor interface set lock Interface port position Wiring diagram yeeka www. .com...
Green: The network connection is successful, the server connection is successful, and the lock can be operated. Remark:If the network connection is failed, please check your network first and try to restart the power. 4.3.2 Platform operation To login→Indoor model→List mode→Choice model→Unlock remotely yeeka www. .com...
Page 18
-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. yeeka www. .com...