Facilities Selection Configuration; Braking Resistor Configuration; Customer Feedback Suggestions - Ya Lang YL600-1.5KW-220V Manual

13. Facilities selection configuration

13.1 Braking resistor configuration:

specification
YL600-1.5KW-220V
YL600-2.2KW-220V
Remarks: The frequency inverter needs to install a brake unit to achieve rapid braking
Note: ①Please select the resistance and frequency of use specified byour
company;
②If you use brake resistors and brake modules that are not provided
by our company and cause the inverter or other equipment to be
damaged by mistake, our company will not take any responsibility;
③The installation of braking resistor must consider the safety
of the environment, flammability, and the distance from the inverter is
100mm;
④If you want to change the resistance and power, please contact your
local dealer;
⑤If you need a braking resistor, the braking resistor needs to be
ordered separately. Please contact your local dealer for details.
⑥For machinery with large inertia, please increase the capacity of
the braking resistor. For details, please contact your local dealer.

14. Customer feedback suggestions

Brake resistor configuration
W
150W
250W
32
Dedicated motor KW
Ω
220Ω
200Ω
1.5KW
2.2KW