Contact the manufacturer’s technical support department. • Do not step on or place heavy objects on top of the unit. To avoid hardware damage, handle all buttons, connectors and switches gently. HELPLINE 0861 40 41 42 • www.spacetv.co.za MOD-HDMI-Q : Operation Manual 1v0...
Page 4
2. INTRO Congratulations on purchasing the MOD-HDMI-Q. You now own a high quality, “Home” DVB-T HD modulator. To get the most out of your purchase, please take the time to carefully read through this manual. 3. INSTRUCTIONS 3.1 DESCRIPTION The MOD-HDMI-Q is a high quality quad DVB-T “Home” modulator which accepts four HDMI inputs and converts them into four RF DVB-T channels on its output.
Page 5
3.2.2 BUTTONS LOCK-MECHANISM The MOD-HDMI-Q will lock the functionality of its buttons after 5 min idle time to avoid of being pushed accidentally. Two red dots on the SSD notify the user that the button interface is locked. To unlock it, the user must press simultaneously the UP + DOWN buttons for 5sec approximately 3.2.3 DIGITAL ATTENUATOR...
+ Button interface of the front panel of the device, following the steps below: STEP 1: Power up the MOD-HDMI-Q by adding the external power supply. The MOD-HDMI-Q will need 40-50secs to initialize itself. The SSD (Seven Segment Display – No 2 / Figure No1 ) depicts the initialization status.
Page 8
As a result, all the above modulators have different values in the above fields. Caution!!! • Every time we choose a different Profile number, the MOD-HDMI-Q will apply a full reset to itself that will last for 40-50 seconds. •...
Page 9
MOD-HDMI-Q and press “Connect”. 2. Once the software has successfully connected with the device, it will automatically download all the settings of the MOD-HDMI-Q. 3. The Lemco GUI xxx.exe consists of five sub-categories as described below: • DVB-T Settings – Parameters regarding the modulator part •...
Page 10
2.6 Output Video Res – Select ouput video resolution 3. Multiplexer Settings In this category the user is able to adjust parameters of the MOD-HDMI-Q multiplexer, as described below: 3.1 Network Name + ID – Enter the Network name + ID* 3.2 Program Name + ID –...
Page 11
4.2 FW Version – Depicts the firmware version of the uP 4.3 SW Version – Depicts the software version of the DVProbe 4.4 HW Version – Depicts the hardware version of the MOD-HDMI-Q 4.5 Serial number – Depicts the serial number of the device Buttons •...
LIMITED WARRANTY This Space HD MOD-HDMI-Q unit is guaranteed against defects in workmanship and materials for a period of one (1) year beginning on the date of purchase of the product. During the applicable warranty period, Space Television will repair or replace at our sole option, without charge, any defective component part of the purchased unit.
Need help?
Do you have a question about the MOD-HDMI-Q and is the answer not in the manual?
Questions and answers