ZK-BEST ZKG9501 Instructions For Use

ZKG9501 Particle Filtering Half Mask
EN 149:2001 + A1:2009 FFP2 NR
The notified body involved in the conformity assessment: CCQS Certification Services Limited, Block 1 Blanchardstown
Corporate Park, Ballycoolin Road, Blanchardstown, Dublin15, D15 AKK1, Ireland (NB 2834).
INSTRUCTIONS FOR USE
Important
Before use, wearer must read and understand this INSTRUCTIONS FOR USE. Keep these instructions for reference.
Applications
The product is suitable for protecting against non-toxic and low-to-average toxicity solid and liquid aerosols (e.g. oil-mists)
in concentrations up to 10 × WEL.
*NOTE: WEL = Workplace Exposure Limit.
The product is used for particles such as those from sweeping, grinding, sanding, sawing, bagging, or processing minerals,
coal, iron ore, metal, wood, cotton, powder, pollen, and certain other substances. It is personal equipment and must not be
made available to other persons.
Check Prior to Use
Inspect respirator, including any component parts, for holes, tears or damage prior to use. Should any damage be identified,
DO NOT USE. Get a new one.
Fitting Instructions
1. Unfold the mask, place the mask over your nose and mouth. Be sure the noseclip is on top.
2. Use a mask against the chin, pull the earstrap behind your ear, and hang it on your ear. Use the earstrap buckle to buckle the
earstrap. According to the size of the face, adjust the position of the earstrap on the hook of the earstrap buckle to make the
mask fit the face.
3. Place your fingers on the middle of the noseclip, and press your hands from the middle of the noseclip to the sides of the
nose bridge, mold the noseclip around your nose to achieve a secure seal.
4. The seal of the mask on the face should be fit-checked before entering the workplace.
Fit Check
1. Cover the front of the mask with both hands being careful not to disturb its fit.
2. (a) UNVALVED mask – EXHALE sharply;
(b) VALVED mask – INHALE sharply.
3. If air leaks around the nose, re-adjust the noseclip to eliminate leakage. Repeat the above fit check.
4. If air leaks at the mask edges, work the straps back along the sides of the head to eliminate leakage. Repeat the above fit
check.
*NOTE: Change mask immediately if breathing becomes difficult or mask becomes damaged or distorted, or a proper face
fit can not be maintained. Do not modify, wash or exchange the masks.