Download Print this page

FUSION TLC Raven Quick Start Manual

Download this manual

Quick start guide

Raven

Need help?

Do you have a question about the Raven and is the answer not in the manual?

Page 1 Quick start guide Raven...
Page 2 We created the Raven with one goal in mind: bring total light control to your fingertips. We can’t wait to see what you create.
Page 3 United States and Canada Table of Contents WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Physical Orientation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Page 4 Raven. Press and hold the Shoe Release on both sides of the Raven and then slide the Raven onto the hotshoe mount of the camera. Do not force the Raven onto the hotshoe mount.
Page 5 (2) enable/disable TTL a zone is not enabled, no intensity value will be (3) enable/disable SpeedCycle displayed. If a zone is enabled, the Raven will (4) enable/disable MultiPop trigger it. To enable a zone, press and hold the (5) enable/disable modeling...
Page 6 Prepare Flash Place the flash in the same mode (TTL or Manual) and zone as the zone on the Raven you’d like to connect. If using PocketWizard, the remote must be in TTL mode.
Page 7 Warranty This FusionTLC product is covered by a one- year limited warranty. For details and to register, navigate to FusionTLC.com/warranty or scan: Support We’re here to help you. Visit FusionTLC.com/support or scan: fusiontlc.com...