Wonders Technology HX-P200 Instruction Manual And Warranty Information

HX-P200: The ultimate
wireless speaker!
Thank you for purchasing the
HX-P200 wireless speaker for
smartphones, tablets,
notebook computers and other
Bluetooth enabled devices.

Charging the Unit

Approximately 2 hours required for full
charge. Can be charged by using the
USB to Micro USB cord (included)
through computer or AC adapter with
USB jack (not included).
Note: Battery will last up to
4 hours when connected
wirelessly and up to 12 hours when
connected through
Aux-In Audio Jack.

Controls

1 Power Switch
2
Play/Pause Button
3
Volume Controls
4
Bluetooth Indicator
5 Line-In Audio Jack
6
Charging Port
7
Battery Status Indicator
8
Forware/Reverse

Indicators

Indicator
Solid RED
CHARGE
(when
OFF
charging)
Quick Flash BLUE Pairing Mode
BLUETOOTH
Slow Flash BLUE Paired
Solid RED

Listening to your device wirelessly over Bluetooth

To listen to your music over Bluetooth wireless connection, you need to pair your
device with HX-P200:
1. Make sure your device has Bluetooth capability.
2. Slide POWER SWITCH to turn on the unit, indicator will begin to ash.
3. Follow the instructions of your device to pair the unit.
4. Pair your device with the unit by selecting HX-P200 from your Bluetooth listings
on your device or selecting YES. If prompted, then you will listen the paired
successful prompt sound.
5. Press play on your device and use controls on the unit to adjust desired volume.
NOTE: Once you have successfully paired your device, you typically will not need
to repeat the above steps. Please ensure the unit source is set to Bluetooth and
your device has Bluetooth enabled.
NOTE: When pairing with a computer running windows 7 OS, please consult your
computer manufacturer for Bluetooth pairing instructions and/or Bluetooth
Drivers.
Instruction Manual and
Warranty Information

Package Contents

User Manual
Charging Cord
2
Status
Power ON
Charging
Fully Charged
BLUETOOTH
Line-in Mode
TM
HX-P200
Speaker
8 3
7
4
R G E
C H A
1
6 5
CHARGE
®