Download Print this page

Jeckson Electric 47-1010-R Owner's Manual

Wireless remote switch

The WIRELESS REMOTE SWITCH for use with all electric appliances from your easy chair or

bedside. Safe and convenient with simple plug-in installation.

Instructions:

1. Connect the AC Input wires to an AC 120V Power Source. (During connecting, make sure

there is no AC power.)

2. Connect the Output Wires to the Input wires of the controlled device.

3. Install a 12 volt. battery into the transmitter.

4. Turn appliance ON, then control the appliance by simply pressing the ON or OFF button of

the transmitter.

Note:

1. Main switch of the electric appliance must be in the ON position prior to using the Remote

Control.

2. Wireless Remote Switch works up to 50''(15.4m) away.

3. Wireless Remote Switch may be used to control most other electrical devices including

T.V.s, stereos and lamps.

CAUTION

1. For indoor use in dry areas only.

2. For use on electrical devices with 15amp resistive load or max Power 1000W inductive

load.

3. 120 volt AC supply.

Owner's Manual

WIRELESS REMOTE SWITCH

MODEL: 47-1010-R

FCC ID: ELY547-47-1010R

IC 1492A-471010R

Table of Contents

Do you have a question about the 47-1010-R and is the answer not in the manual?

Page 1 Owner's Manual WIRELESS REMOTE SWITCH MODEL: 47-1010-R FCC ID: ELY547-47-1010R IC 1492A-471010R The WIRELESS REMOTE SWITCH for use with all electric appliances from your easy chair or bedside. Safe and convenient with simple plug-in installation. Instructions: 1. Connect the AC Input wires to an AC 120V Power Source. (During connecting, make sure there is no AC power.)
Page 2 WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.