NORSON INDUSTRY EPS134130 Instruction Manual

Instruction Manual (Read before proceeding)
Power:

Please charge your Bluetooth speaker fully before its first use.

Operates using an internal rechargeable Lithium battery.
To charge the battery:

Using a Micro USB cable (included), insert the USB power cable into the micro USB
port located on the back of the speaker. Connect the other end of the USB cord into a
powered USB source such as a computer, laptop or USB AC adapter (not included).

When your Bluetooth speaker is charging, the indicator light will turn red.

Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music Via Bluetooth

Turn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to 'ON' position.

The indicator light will turn blue. This indicates that the speaker is in pairing mode and
is searching for your Bluetooth device.

Make sure the Bluetooth function on your device is turned on.

Search the speaker named "XXXXXX".

Once you have selected the speaker, your device will pair without a password. (If your
device prompts for a password, enter the password"0000".

Once your speaker is paired, the indicator light will begin to flash blue slowly.

Start playing music on your device. Make sure that you keep your device within a 33
foot range of your Bluetooth speaker.
 Adjust the volume of your device to a comfortable level.

Turn off the unit when not in use.
Cautions:
 This is not a toy. Please keep away from children.

Please keep away from direct sunlight, excessive heat and water.

Low power may cause poor connection and/or may cause the Bluetooth function not
working

Dropping the speaker may damage it. Please put it in proper place.
Bluetooth Speaker