CONTENTS In the Box Product Overview LED Indicators Guide How to Turn on/off the Headphones How to Charge the Headphones How to Connect the Transmitter to TV FAQs Technical Specifications Warranty Care and Maintenance Warranty Disclaimer Important Safety Instructions...
In the Box Headphones Power Adaptor RCA Adapter Cable 3.5mm Audio Cable Digital Wireless TV Headphones User Manual Charging Dock (Also serve as a transmitter) User Manual - 1 -...
Product Overview Product Overview Overview of the Headphones Charging Contacts Volume + Button Power Button Volume - Button Signal Indicator Power Indicator Overview of the Charging Dock/Transmitter Charging Pins Signal Indicator 3.5mm Audio Input Charging Port Charging Indicator - 2 -...
LED Indicators Guide The power indicator on the right ear cup stays red. Power on Power off The power indicator on the right ear cup goes off. The signal indicator on the left ear cup flashes green Low Battery and you hear a beep every 1 minute until the headphones turn off automatically.
Page 6
2. Place the headphones on the charging dock. Make sure the charging contacts under the headband match well with the charging pins on the charging dock. 3. The charging indicator on the charging dock keeps flashing green once charging starts, and it stops flashing and stays green when the headphones are fully charged.
How to Connect the Transmitter to TV Connect the Transmitter to a TV with a 3.5mm Audio-out Port ① ② Connect the power adapter to the Connect one end of the 3.5mm transmitter and plug the mains charger audio cable to the audio input port into a power source.
Page 8
Connect the Transmitter to a TV with RCA Outputs ① ② Connect the power adapter to the Plug the provided RCA adapter transmitter and plug the mains charger cable into the RCA outputs on your into a power source. TV and the 3.5 audio cable into the audio jack of the adapter cable.
Q: How to pair two or more headphones HW1 with one transmitter? A: • When a pair of Hspro TV headphones HW1 has successfully paired with the transmitter, press and hold the power button of a second pair of headphones HW1 until the power indicator on the right ear cup stays red, and the signal indicator on the left ear cup keeps flashing green.
6 hours Operating Time 10 hours (at medium volume) Warranty All Hspro TV headphones are backed by a one-year warranty. If you have any questions or suggestions about the product or packaging, please contact us via email: support@servicehspro.com. Care and Maintenance Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Important Safety Instructions ● Use of headphones will impair your ability to hear other sounds. Use caution while using your headphones when you are engaging in any activity that requires your full attention. ● If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product.
Need help?
Do you have a question about the HW1 and is the answer not in the manual?
Questions and answers