Table of Contents
Advertisement
Quick Links
TC-320
Trademarks and Brand Names shown are the property of their respective owners.
TheTC-320
is powerful, compact, efficient, cost effective, easy to operate and user-friendly to
maintain. Before operating the
Responsibility statement below and read this Manual thoroughly for important information and
instructions for the safe operation of this sophisticated piece of equipment which will enable you
to keep your machine running at peak efficiency for decades.
If at any time you have questions or issues, contact us:
In the USA:
info@transactinc.com
Elsewhere:
service@wctinfo.com
Electrostatic Sprayer
Operator Manual
_____________________
This manual last updated August 2020
TC-320
for the first time,
please read the Operator
Thank you, we appreciate your business!
For your
The
Microbecide® TC-320
Electrostatic Sprayer:
______________________
Model #
______________________
Serial #
______________________
Spraygun Serial #
______________________
Purchase Date
records:
Page 1
Advertisement
Table of Contents
Summary of Contents for Microbecide TC-320
- Page 1 Thank you, we appreciate your business! If at any time you have questions or issues, contact us: For your records: In the USA: Microbecide® TC-320 info@transactinc.com Electrostatic Sprayer: ______________________ Model # Elsewhere: service@wctinfo.com...
-
Page 2: Operator Responsibility
Always flush out the spraygun and hose with clean soapy water after every day’s operation. This is the most important thing you can do to ensure trouble free operation of the TC-320. Failure to clean these on a regular basis will cause the system to malfunction and will negate the warranty. - Page 3 Therefore, you can stay well away from the target surface and let the electrostatic attraction do the work. Here are some tips to achieve the best possible coverage with the TC-320: 1. First charge the battery in the spraygun...
- Page 4 2. Before spraying expensive material train yourself to use the TC-320 using water as the spray liquid. TC-320 should always be operated at temperatures above 50° Fahrenheit (10° Celsius) otherwise the atomized liquid might freeze at the nozzle opening. 4. Set the Flow Control Gauge at 100 to 120. Check this setting from time to time as the flow rate changes with operating temperature of the sprayer as well as the temperature and humidity of the areas in which you are spraying.
- Page 5 Always make sure liquid is flowing through the sprayer when power is applied. Failure to keep liquid flowing through sprayer may result in the liquid pump overheating. The TC-320’s compressor becomes enough to burn during operation especially when continually running.
- Page 6 5. The Electrostatic Spraygun For operator safety the power supply for the TC-320 spraygun is separate from the power supply for the TC-320 compressor. The spraygun is powered by a 12V battery located at the base of the spraygun housing.
-
Page 7: Setting Flow Rate
7. Setting Flow Rate The Flow Rate setting is determined by: 1. Coverage Desired, i.e., the amount of liquid you wish to apply to a given surface 2. Operator Speed, i.e., the time required for an operator to spray a given area. An experienced operator can adequately spray about 10 Square Feet (one Square Meter) in 3 seconds. -
Page 8: Maintenance
This is the most important thing you can do to ensure trouble free operation of the TC-320. By cleaning at the end of the workday you will avoid long-term buildup that will eventually cause clogs, poor spray patterns and shorten spraygun life. - Page 9 ⋅ Tripped GFCI ⋅ Reset GFCI ⋅ Dirty air filter ⋅ Clean air filter See our website https://microbecide.com/partners.php for a list of our Distributors World Changing Technologies Pte Ltd TransAct, Inc. 80 Genting Lane #05-02 5 Slate Court, Suite C2...
Need help?
Do you have a question about the TC-320 and is the answer not in the manual?
Questions and answers