Table of Contents
Advertisement
Quick Links
ESPANGO – peristaltic pumps technology
Branch of Teknofluor Srl
Via Pietrasanta, 12
20141 MILANO
ITALY
Phone: 02 5830 4949 – Fax: 02 5830 4889
Email:
espango@espango.it
www.espango.it
With this declaration we declare that the peristaltic pump ESPANGO model IPL10
Serial no. _______________ year____________
Is made according to the CE directive: 2006/42/CE
Technical dept.
Fabio Miccolis
_______________
Milan, _____________________
[] DDT
CAUTION
All the peristaltic pumps supplied by ESPANGO are mostly employed to transfer
POTENTIALLY DANGEROUS chemical products.
STICK WITH the following instructions:
. the assembly and the application have to be executed only by an authorized staff;
. follow the functioning and the maintenance norms; when in doubt please contact our
technical dept.;
. near the pumps the operators have to wear appropriate protection clothing (helmet,
glasses or screen, aprons, boots, gloves, etc.);
. do not intervene on the pumps with tools when they are in function; in case of
disassembly or inspection previously wash and reclaim all the components which have
been in contact with the liquids.
N.B.: these warnings are part of the conformity declaration or of the instructions manual
when accompanied to them.
Manuale_IPL10_ENG_R0.doc
CONFORMITY « CE » DECLARATION
Version ____________________
[] QUALITY
Manager
Aldo Scaletti
__________________
1
[] CUSTOMER
Advertisement
Table of Contents
Related Manuals for ESPANGO IPL 10 Series
Summary of Contents for ESPANGO IPL 10 Series
- Page 1 Phone: 02 5830 4949 – Fax: 02 5830 4889 Email: espango@espango.it www.espango.it CONFORMITY « CE » DECLARATION With this declaration we declare that the peristaltic pump ESPANGO model IPL10 Version ____________________ Serial no. _______________ year____________ Is made according to the CE directive: 2006/42/CE Technical dept.
- Page 2 INSTALLATION, PROGRAMMING & MAINTENANCE INSTRUCTIONS PERISTALTIC PUMPS IPL 10 RANGE IPL10/24 IPL10/30 IPL10/100 Manuale_IPL10_ENG_R0.doc...
- Page 3 The data indicated in the present manual refer to the standard model. Eventual variations realized on specific customer demand could partially or totally modify them. In case of need, please contact our Technical Dept. (phone 02 5830 4949 – espango@espango.it) for any useful explanation. Manuale_IPL10_ENG_R0.doc...
-
Page 4: General Security Information
1. GENERAL SECURITY INFORMATION 1.1 APPLICATIONS The employment of peristaltic pumps to transfer liquids or gases has many advantages: thanks to its operating principle it is the only pump able to carry fluids without any direct contact with the product. A new tube for each product can be employed, avoiding heavy cleaning. -
Page 5: Electrical Connection
SETTING POSITIONING Handle the pump with care, avoiding shots. Never pick up the pump by its head or by the cable. The pumps doesn’t have to be installed in a excessively dusty place. Place the IPL 10 pump on a solid and non-flammable surface and be sure that it is firmly supported. -
Page 6: Control Panel
3. DESCRIPTION PUMPING HEAD The IPL 10 pumps can be provided with the following pumping head models: IPL 10/24: head IPS24 - 2 or 3 rollers (see photo) IPL 10/30: head IPS30 - 3 or 6 rollers (see photo) IPL 10/100: head IPS100 - 3 or 6 rollers (see photo) IPL 10/24: head IPS24 IPL 10/30: head IPS30 Components identification:... - Page 7 4. FUNCTIONING 4.1 TUBE INSERTION THE PUMP MUST BE SWITCHED OFF! PUMPING HEAD IPS24 Unscrew both fastening screws (1) 2. Remove the old tube (4) 3. Lay the tube in the pumping head, eventually slightly turning the roller rotor (3) to facilitate the handle, hooking it to the case by mean of its plastic fittings (5).
- Page 8 4.3 FUNCTIONING WITH TIMER (OPTIONAL VERSION) Timer 0,01 secondo Timer 1 secondo 1 2 3 4 4.3.1 VERSION WITH 1” TIMER . Press the key 1. “PROG” on the front to activate the programming of the ignition time . Scan with the key PROG the functionality hours/minutes/seconds. Use the keys 2. “+” / 3.
-
Page 9: Switch Off
FUNCTIONING PROBLEMS PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION 1.The pump doesn’t a. the cable is not connected connect the cable start b. burnt/defective fuse change the fuse c. the rotor is blocked due to assemble correctly wrong assembly 2. the tube is mashed Wrong tube dimensions or the Use the appropriate tube or and the range is reduced tube is worn... -
Page 10: Maintenance
5 MAINTENANCE The performances of the IPL 10 pump can be granted only if all the requested controls, the extraordinary maintenance and the repairs are made by our authorized staff. CLEANING Use a water and delicate soap solution, with a smooth cloth, without abrasive to clean the surfaces and the control commands. -
Page 11: Technical Specifications
6. TECHNICAL SPECIFICATIONS CHARACTERISTICS Measurement units Case dimensions, net of pumping head (width x height x length) 120 x 120 x 240 Case dimensions, pumping head included IPS24 (width x height x length) 146 x 120 x 240 IPS30 (width x height x length) 166 x 120 x 240 IPS100 (width x height x length) 175 x 120 x 240...
Need help?
Do you have a question about the IPL 10 Series and is the answer not in the manual?
Questions and answers