Download Print this page

Omago Smart Diaper Sensor User Manual

Dock

Omago Smart Diaper Sensor Dock User Manual

Thank you for purchasing Omago Intelligent Diaper Sensor. Please read this user manual in detail

and follow up the instruction.

*** Omago Intelligent Diaper Sensor is not included, you can purchase it separately

Instructions

Charge Omago Intelligent Diaper Sensor before starting to use.

The device will be a normal state by the indicator from LED_1 to LED_8 flickering back and forth

one time.

1. Pairing the Dock with the Intelligent Diaper Sensor

The Dock can pair with up to 8 Smart Diaper Sensors. You can get every paired Smart Diaper

sensor status by the led on Dock.

Please select the sensor link button on the Dock, such as 1. After pressing the link button, the

button led will flash blue. Take one Intelligent Diaper Sensor and press the connection button for

3-5 seconds for pairing. The link button led will become constant blue if pairing successfully. If

not, please repeat the link process. Please pair all these 8 Intelligent Diaper Sensor by the above

Table of Contents

Do you have a question about the Smart Diaper Sensor and is the answer not in the manual?

Page 1 Omago Smart Diaper Sensor Dock User Manual Thank you for purchasing Omago Intelligent Diaper Sensor. Please read this user manual in detail and follow up the instruction. *** Omago Intelligent Diaper Sensor is not included, you can purchase it separately Instructions Charge Omago Intelligent Diaper Sensor before starting to use.
Page 2 (the link button corresponding to the Dock will flash blue and the sensor flashes red), it will automatically connect to the Dock again when coming back to the nursery room. 4. Put Smart Diaper Sensor into strap and stick to the position of the diaper corresponding to the human excretory hole to get the best effect.
Page 3 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.