DeMore's Innovative Design Aerial Tool Bin ATB-1312 Instructions

1 Year Warranty

DeMore's Innovative Design, Inc.
herewith guarantees the structural
integrity of the Aerial Tool Bin
product, for one year and warrants it
against all manufacturer defects. This
Warranty is not applicable to any
damage caused by user or caused
by use other than its intended
purpose on aerial platforms.
Replacement subject to approval by
DeMore's Innovative Design, Inc.
Upon approval, the Aerial Tool Bin
will be replaced free-of-charge.
Call DeMore's Innovative Design, Inc.
for assistance at: 262-825-6784
Thank You for putting your trust
in the Tool Bin Man
choosing the Aerial Tool Bin
www.aerialtoolbin.com
200414 ATB-1312 Insert Card

INSTRUCTIONS for Model ATB-1312

®
1) Remove the warranty and keep in a safe place for your records.
2) Read all warnings on bin and equipment where bin is used.
3) Remove the divider separators and all
components from the packaging on the
sides of the Aerial Tool Bin
4) Place the Dividers in the channel slots and
®
allow bottom of divider to insert weep holes.
5) Fasten the tool belt hanger bar with the
two small carriage bolts provided. Insert the
1 /
1
2
the tool pouch and Secure the bar.
6) Insert the two long Lift Rail safety locking
bolts, (provided) Prior to operating your aerial lift.
7) To insert the tool pouch, remove the carriage bolt from the tool belt hanger
and
®
bar and slide the tool pouch on. Re-insert the carriage bolt.
.
®
8) Load your larger tools in the Aerial Tool Bin
U.S. Patent No.: D675.824
DeMore's Innovative Design, Inc.
.
®
" carriage bolt with wing nut to help retain
Divider
Separators
2 long Lift Rail Lock Nuts
safety locking
bolts
Tool Belt
Hanger Bar
1 / "Carriage
1
2
Bolt & Wing
Nut
and you're ready to go to work.
®
Made in the USA
Flat
Washers
Small
Carriage
Bolts