Download Print this page

Technical Specification - KALOS KLEH140-0400 Assembly Instructions Manual

Copper electric lantern heater – 73cm, 84cm, 89cm

Advertisement

For Your Safety & Technical Specification
32. When assembling, keep clear from any
board or flammable material.
33. Do not use the heater with a
programmer, timer or any other
device that switches the heater on
automatically.
34. One dark point may exist on the surface
of the heating elements during the
first few minutes after it is turned on.
This is normal, and will not affect the
performance of the unit.
Heater Handle
Touch Switch
OFF/ON
Protection Mesh
Heater Lamp
Power Switch
Heater Base
35.
WARNING!
In order to avoid
overheating, do not cover the heater.
36. The appliance is not to be used by
children or persons with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been supervision
or instruction.
35.
DO NOT COVER!
with anything during operation or a
short time after it's shut down.
This warning symbol
indicates that the surface is
hot and caution is required.
This warning symbol
indicates that the heater
should not be covered.

Technical Specification

• Power supply 220-240V~ 50Hz
• Wattage 1500W/1800W/2000W
• Insulation class I
• Height: Three different sizes
Don't cover the unit

Advertisement

loading

This manual is also suitable for:

Kleh141-0400