INSERTION AND EJECTION OF DISCS
We recommend you use a good quality 700MB CD from a reputable manufacturer for all recordings.
Recording time on a 700MB disk is 77 minutes.
Insert a CD into each section with the label uppermost. Feed in the disc until it is captured
•
by the mechanism.
To eject a disc, if a recording is being made, first stop the recording by pressing the stop button,
•
then press the eject button.
If not using an uninterruplible power supply, failure of the mains during a recording will prevent ejection
•
of the discs. Restoration of mains power will cause the discs to be finalised and ejected.
The Recorder should NOT be transported with discs inserted.
•
DISPLAY ICONS
The display shows icons representing the status of each section
Ĉ
Media presence - Indicator shows that a disc is present and ready for use.
Ċ
No media
ą
Alarm - Alarm symbol is used to signify an alarm condition.
Ď
End of media
ď
Low media
đ
Disc failure
During normal operation, the media presence indicators
Ĉ
alternate with:
W - During recording
F - During finalisation
E - During ejecting
4