Advertisement
Quick Links
MOUNTING INSTRUCTIONS
GLUEING DIFFUSORS
This manual is for the following products : WDS-7, Diffusor Wave.
UNBOXING
Open the package carefully! Inserting sharp objects
into the package can damage the diffuser. Avoid
using long, sharp tools for opening the package!
DETERMINE THE POSITION
While determining the mounting positions, it helps
to mark the walls and ceiling using a level and
tape measure, in order to achieve even spacing in
relation to corners and sound sources.
TOOLS
The following tools are needed for installation:
✓
✓
Box Cutter
Level
✓
✓
Caulk Gun
Folding ruler or tape measure
✓
✓
t.akustik glue
Pencil
We recommend using our t.akustik glue for installation.
REMOVE PRODUCTS
FROM PACKAGING
Carefully remove the products from the package
and remove the protective film. Also remove the
mounting clips and set them aside.
EN
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for t.akustik WDS-7
- Page 1 MOUNTING INSTRUCTIONS GLUEING DIFFUSORS This manual is for the following products : WDS-7, Diffusor Wave. TOOLS The following tools are needed for installation: ✓ ✓ Box Cutter Level ✓ ✓ Caulk Gun Folding ruler or tape measure ✓ ✓ t.akustik glue Pencil We recommend using our t.akustik glue for installation.
- Page 2 PREPARE THE CAULK GUN Carefully open the glue cartridge using a utility knife. Take care to point the knife away from your body. Thread the included nozzle onto the opening. Insert the cartridge into the caulk gun. For thicker lines of glue, you can use the knife to enlarge the opening of the nozzle.
Need help?
Do you have a question about the WDS-7 and is the answer not in the manual?
Questions and answers