Rotisseries 350 - Deco Chef 24 QT Instruction Manual

10. Place the grooved end (Left Side - see Figure 1) of the Rotisserie Spit on the
left interior wall of the oven.
11. Plug on the oven with power, LED shows OFF. Under this mode, any knob
turn or start/ stop button press can activate machine entering into be standby
mode.
12. Turn function knob, select the function of rotisseries, under this mode, time
and temperature, fan speed display as bellow.
function name Icon temperature ( ℉ ) time (mins) fan speed
Rotisseries 350 45
13. Press start/stop button, turn on the oven. The rotisseries icon will flash, the
remaining icons shut off.
When the set time has expired, display screen shows OFF.
14. Unplug from the wall outlet when not using the oven.
15. Remove the roast from the oven using the Rotisserie Removal Tool by placing
the tool underneath the grooved edges of the Spit. Lift the left side up and
towards you at an angle and slide the right side of the Spit out of the Rotisserie
Socket.
16. Place the roast on a cutting board or platter and allow to stand for 10-15
minutes.
17. Using a pot holder, loosen the Rotisserie Screws on the Rotisserie Forks and
remove the Rotisserie Spit from the roast.
18. Carefully remove the Rotisserie Forks and carve the roast.