Related Manuals for Flair Espresso 58
Summary of Contents for Flair Espresso 58
- Page 1 Flair 58 Preheat System Safety & Instructions Guide Flair Espresso 28 Hammond Street, Suite B Irvine, CA 92618 www.flairespresso.com - service@flairespresso.com...
- Page 2 • A power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. • Electric brew head must be used while installed on the portafilter base of the Flair 58 only. Before use, ensure the Flair 58 is on a flat and even surface.
- Page 3 These temperature tiers are meant to loosely correspond to different roast levels: light, medium and dark but can be used as desired to dial-in your shot of espresso for the best taste experience. Your Flair 58 Preheat System is not meant to boil your water, and cannot be used for anything other than its intention of maintaining a constant temperature on your brew heat for enhanced thermal control.
- Page 4 1. Brew Head with four-pin (male) connector 2. Power Supply with a single-pin (female) connector 3. Preheat Controller with four-pin (female) and single-pin (male) connectors 4. Power Supply Extension Cord Flair 58 Preheat System Safety and Instruction Guide - service@flairespresso.com Page 3...
- Page 5 3. Follow instructions to put together your Flair 58 base and lever, with the included screws 4. Add your Flair 58 Brew Head onto the portafilter base and lock into place by turning counter-clockwise (when locked, the Flair 58 logo should be facing front) 5.
- Page 6 Once a temperature setting has been reached, the Preheat System will maintain that setting until turned off. In order to reduce the level of your preheat - from high to medium, or medium to low - simply use short presses of the button to quickly cycle through the various heat settings. Flair 58 Preheat System Safety and Instruction Guide - service@flairespresso.com Page 5...
- Page 7 Failure to allow the system to cool adequately can result in burns. Cleaning should be completed with cool water only, and a clean damp cloth. No soaps or detergents are needed and may damage your Flair 58 and your Preheat System.
Need help?
Do you have a question about the 58 and is the answer not in the manual?
Questions and answers