Cautions
1. The unit must only be operated by professional lighting engineer or electrician in accordance with the
Safety requirements of the Chinese People's Republic of operation and installation.
2. Operate strictly with the above instructions, please do not disassemble or repair by yourself. Failure to
professionals repair and maintenance has to buy my factory original parts or the corresponding parameters
of the electronic parts.
3. Fixed installation and prevent being strong vibration or impact.
4. Before connect the power, make sure that power supply good ground, then tighten the electrical components
to avoid electric shock.
5. There are no serviceable parts inside, please do not open it.
6. Transport again, please note shockproof, the best use of the original.
Warnings
1. During installation and maintenance work, please verify that the power cut off.
2. Keep combustible materials and lighting from distance above 0.5meters.
3. The lights on the power requirements of 100-240V, 50-60Hz. If beyond this range, recommended regulator
device, otherwise it will seriously affect life span.
Installation
1. Before installation, please make sure the power supply is in line with lamps required.
2. Please install by the professionals, fix safely and adjust to suitable beam angle.
When installing this equipment, make sure that within 0.5m range there is no extreme and explosive items,
lamps and wall partitions with the distance of above 15cm.
Maintenance
Keep the equipment with Regular maintenance and repair. Due to long-term use of lighting, the light exit lens
surface of dust, air humidity, reducing the lamp output power, resulting in damage to electrical parts. Please use
a damp cloth and water to clean the lens surface, do not use organic detergent by a professional electrician or
lighting of the user. The period of maintenance is subject to three months.
Technical specification
Output
Lightsource
Electricity
Control
Optical system
Housing
LED outstage 2408 RGBW(4 in 1)
Lux@2m
Lux@4m
Lux@6m
Lux@8m
LED Qty
Drive current
Color range
Input voltage
Power
On-board control
Control protocol
Channel mode
Dimmer
Beam Angle
Weight
10200Lux
2520 Lux
1090 Lux
620 Lux
24*4 in1
700mA
16.7 million
100~240VAC
158W
4 display
DMX512
8CHs
0~100%
25°(15°/30°/50°Optional)
7.8kg
Need help?
Do you have a question about the PAR-OUTDOOR24X8W and is the answer not in the manual?
Questions and answers